T-80 Air

b.fralick

Greenie
Sep 1, 2003
11
0
My T-80 doesn't seem to be putting out enough air. I have checked the drive belt and it's tight and turning. When I get to breathing a little harder from moving rocks I end up gasping for air and in some cases have to surface cause there's just not enough. This lack of air is new this season, everything was working fine when I stored the dredge. Is there something else I should be checking or changing ? Any idea what the output of the compressor should be ? All input appreciated... Bill
 

Upvote 0

aarthrj3811

Gold Member
Apr 1, 2004
9,256
1,169
Northern Nevada
Detector(s) used
Dowsing Rods and a Ranger Tell Examiner
Bill----------Did you check the filter on the air intake? Also check the head bolts and the air releive value.
 

Hoser John

Gold Member
Mar 22, 2003
5,854
6,721
Redding,Calif.
Primary Interest:
All Treasure Hunting
Also check the head for leaks.The ribber gasket gets old and cracks or the head loosens up.The metal flap inside can get corroded too and need a good cleaning if it's not seating correctly and you get blowback.Tons a air 2 ya 2-John ;D
 

OP
OP
B

b.fralick

Greenie
Sep 1, 2003
11
0
Thanks for all the help. A bad bearing is what was messing up the works. Replaced the bearing and rebuilt the compressor.
 

Top Member Reactions

Users who are viewing this thread

Top