Does this look like a good qaurtz vein for gold?

Cj4351

Newbie
Jan 23, 2019
4
6
Primary Interest:
All Treasure Hunting

Attachments

  • B45C0199-F5A2-416B-A932-0E410EFDB6D6.jpeg
    B45C0199-F5A2-416B-A932-0E410EFDB6D6.jpeg
    285.9 KB · Views: 178
  • A1D31251-BC65-4C1C-BDD2-808C942633B7.jpeg
    A1D31251-BC65-4C1C-BDD2-808C942633B7.jpeg
    299.2 KB · Views: 161
  • 79EF9A09-B8AA-4C60-9F8A-4D3E040024AB.jpeg
    79EF9A09-B8AA-4C60-9F8A-4D3E040024AB.jpeg
    278.6 KB · Views: 135
Upvote 0
OP
OP
C

Cj4351

Newbie
Jan 23, 2019
4
6
Primary Interest:
All Treasure Hunting
In the first pic it looks like the 2 rocks melted together where the qaurtz goes deeper down.
Thanks for the help.
 

63bkpkr

Silver Member
Aug 9, 2007
4,069
4,618
Southern California
Detector(s) used
XLT, GMT, 6000D Coinmaster
Primary Interest:
All Treasure Hunting
The solution that comes up from deep down in the earth is super hot! As it reaches California's tilted layers it squirts up through the existing cracks between layers and as it goes up it cools. As it cools, IF there is any gold there in any Significant amount it precipitates out of solution into veins. IF!

If you have access to a good crusher then yes, break a good hunk off, crush really fine and pan or miller table it out to see if any yellow colors show up. Gotta try something to answer that question itching in your mind. Good Luck!..................63bkpkr
 

AllenJ

Full Member
Mar 7, 2018
133
225
Northern CA
Detector(s) used
White's TDI SL, Minelab GPX5000 & GM1000, Garrett Pro Pointer
Primary Interest:
Prospecting
Well said 63bkpkr, you have to scratch that itch or it'll drive you crazy. I swam a river last year and found a hard packed crack high up on the bank, decided to leave it to work stuff closer to the water. It is driving me insane having to wait to get back to that crack!

Cj take a hammer and chisel down there and get a good sample. If you don't have or know someone with a crusher there are other ways to do it yourself, YouTube it for ideas. I broke up a few samples of quartz last summer and did find one with extremely fine gold in it so you never know until you do the work.


Good luck sir.
 

A2coins

Gold Member
Dec 20, 2015
33,807
42,606
Ann Arbor
🏆 Honorable Mentions:
3
Detector(s) used
Equinox 800
Primary Interest:
All Treasure Hunting
Good luck also
 

63bkpkr

Silver Member
Aug 9, 2007
4,069
4,618
Southern California
Detector(s) used
XLT, GMT, 6000D Coinmaster
Primary Interest:
All Treasure Hunting
Cj4351/Allen,
I found a quartz deposit a "few years back" kinda like what Cj is talking about. I walked around it, stood on it, looked at it and walked away from it. Like Allen said the itch is burning to find that thing again, its not much of a deposit only 40' to 65' in length and 3' to 6' in width. At the time I saw it, the quartz was roughly 2' out of the ground. I've been trying to find it for the last two years! I'm close, just not on top of it.................63bkpkr
 

beekbuster

Hero Member
Jan 17, 2015
750
1,676
Detector(s) used
gpx 4500
gpz (died in a fire. rip)
Primary Interest:
Other
Well said 63bkpkr, you have to scratch that itch or it'll drive you crazy. I swam a river last year and found a hard packed crack high up on the bank, decided to leave it to work stuff closer to the water. It is driving me insane having to wait to get back to that crack!

Cj take a hammer and chisel down there and get a good sample. If you don't have or know someone with a crusher there are other ways to do it yourself, YouTube it for ideas. I broke up a few samples of quartz last summer and did find one with extremely fine gold in it so you never know until you do the work.


Good luck sir.

i found a hard packed gyro hole a good 50- 70 ft above the high water line, well out of flood zone, about 20" round, who knows how deep.....i found some good color as i panned out the top. havnt been back in years as the metal detector has been my focus for some time now.... i would like to get back to see what is in the bottom of that hole.

as for the vein, crush and pan. your detector could be responding to variations in ground, ie: the vein, or one side is different than the other
 

arizau

Bronze Member
May 2, 2014
2,485
3,870
AZ
Detector(s) used
Beach High Banker, Sweep Jig, Whippet Dry Washer, Lobo ST, 1/2 width 2 tray Gold Cube, numerous pans, rocker box, and home made fluid bed and stream sluices.
Primary Interest:
Prospecting
i found a hard packed gyro hole a good 50- 70 ft above the high water line, well out of flood zone, about 20" round, who knows how deep.....i found some good color as i panned out the top. havnt been back in years as the metal detector has been my focus for some time now.... i would like to get back to see what is in the bottom of that hole.

as for the vein, crush and pan. your detector could be responding to variations in ground, ie: the vein, or one side is different than the other

Must be nice to have the confidence to ignore almost sure things in favor of hit and miss ground that is potentially richer.:laughing7:

More good luck!
 

Kona Koma

Bronze Member
Nov 13, 2017
1,000
1,963
On the Beach
Detector(s) used
Minelab Equinox 800
Minelab Quattro
Primary Interest:
All Treasure Hunting
Gold is where you find it. Go after it. Nice pictures. Good luck.
 

TerryC

Gold Member
Jun 26, 2008
7,735
10,996
Yarnell, AZ
Detector(s) used
Ace 250 (2), Ace 300, Gold Bug 2, Tesoro Cortes, Garrett Sea Hunter, Whites TDI SL SE, Fisher Impulse 8, Minelab Monster 1000, Minelab CTX3030, Falcon MD20, Garrett Pro-pointer, Calvin Bunker digger.
Primary Interest:
Metal Detecting
Of course you must check it out. I would also check the ground below and downhill from the vein. Thousands of years of erosion did most of the work already. No gold in the float below the vein.... no gold in the vein. TTC
 

Top Member Reactions

Users who are viewing this thread

Top