Need instructions for a Sunray probe

TabWhisperer

Sr. Member
Mar 17, 2010
404
41
Denver, Colorado
Detector(s) used
TDI SL, Equinox800, Whites XL Pro w/tone mod, Makro Racer, Whites IDX Pro w/Bills mods
Primary Interest:
Metal Detecting
Upvote 0

jeff of pa

Super Moderator
Staff member
Dec 19, 2003
85,844
59,630
🥇 Banner finds
1
🏆 Honorable Mentions:
1
Primary Interest:
All Treasure Hunting
there are no instructions.

Once you decide where to mount
your Sunray Box & Probe,

Picture 007.jpg Picture 008.jpg

You just thread the coil wire into the sunray box.

Picture 012.jpg


Thread the sunray box wire into the control box
of your detector.

Picture 011.jpg

And flick the toggle to left or right depending on
if you want to use the coil or the probe to detect.

Picture 009.jpg
 

OP
OP
TabWhisperer

TabWhisperer

Sr. Member
Mar 17, 2010
404
41
Denver, Colorado
Detector(s) used
TDI SL, Equinox800, Whites XL Pro w/tone mod, Makro Racer, Whites IDX Pro w/Bills mods
Primary Interest:
Metal Detecting
Thanks. Is the probe sensitive in all directions or mainly just at the tip? Do you typically use it in normal mode or go to all metal?
 

McKinney_5900

Bronze Member
Jul 30, 2010
1,140
930
jeff of pa said:
there are no instructions.

Once you decide where to mount
your Sunray Box & Probe,





You just thread the coil wire into the sunray box.



Thread the sunray box wire into the control box
of your detector.




And flick the toggle to left or right depending on
if you want to use the coil or the probe to detect.

Where do you get those tip protectors, the red thing on that pictured probe?
 

jeff of pa

Super Moderator
Staff member
Dec 19, 2003
85,844
59,630
🥇 Banner finds
1
🏆 Honorable Mentions:
1
Primary Interest:
All Treasure Hunting
Jimbog said:
Thanks. Is the probe sensitive in all directions or mainly just at the tip? Do you typically use it in normal mode or go to all metal?

on my sovereign mainly at the tip.

On the Explorer it will detect all directions
with High sensitivity.

Depends on how powerfull your detector is
 

jeff of pa

Super Moderator
Staff member
Dec 19, 2003
85,844
59,630
🥇 Banner finds
1
🏆 Honorable Mentions:
1
Primary Interest:
All Treasure Hunting
McKinney_5900 said:
jeff of pa said:
there are no instructions.

Once you decide where to mount
your Sunray Box & Probe,





You just thread the coil wire into the sunray box.



Thread the sunray box wire into the control box
of your detector.




And flick the toggle to left or right depending on
if you want to use the coil or the probe to detect.

Where do you get those tip protectors, the red thing on that pictured probe?

came with the probe.

You can try a water bottle cap.

Or a plastic water pipe cap from Lowes or other Hardware
 

Top Member Reactions

Users who are viewing this thread

Top