Old Farmstead

cybball

Jr. Member
Mar 19, 2013
31
11
Iowa
Detector(s) used
Garrett Ace 250, Garrett Pro Pointer
Primary Interest:
Metal Detecting
Upvote 0

JSMITH

Sr. Member
Feb 23, 2013
297
128
Idaho
🏆 Honorable Mentions:
1
Detector(s) used
Garrett AT PRO,Garrett Ace 250,Pro-Pointer
Primary Interest:
All Treasure Hunting
Run the Ace 250 with the sensitivity as high as you can without falsing and in All Metal mode. That being said, dig all targets above the last notch on the left, that you can get good repeatability on in all directions. This is what I discovered works the best with that machine, at least for me. I dug less trash and more good targets after I employed those settings/tactics. Hope this helps. HH and good luck!
 

Last edited:

Ism

Hero Member
Jun 17, 2009
640
206
Michigan
Detector(s) used
Tesoro Vaquero
Whites TDI
Minelab Sovereign GT
XP Deus
Primary Interest:
All Treasure Hunting
Take 5 of the rusted nails you dig and a dime. Arrange the nails around the dime about 2-4 inches away on a piece of cardboard.
Do some testing with your ace (or any detector for that matter).
You will be surprised what will be hidden by nails and other iron objects.
 

OP
OP
C

cybball

Jr. Member
Mar 19, 2013
31
11
Iowa
Detector(s) used
Garrett Ace 250, Garrett Pro Pointer
Primary Interest:
Metal Detecting
Both great responses. thanks. i will give these a shot.
 

Top Member Reactions

Users who are viewing this thread

Top