E-Trac control box connector

[DieHard]

New to the E-Trac, was just wondering is the connector on the control box is suppose to be lose and wobbly. Thanks DieHard

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[DanRiverMan]

The CONNECTOR ITSELF does have a little play in it..I guess it may be because the upper rod has to go so far into the control box..

Scott

 

[DieHard]

Thanks, yes it is lose and wobbly, and i pushed upper tube all the way in till it stopped and locked it down

 

[DanRiverMan]

You are good to go then..Good luck..

 

[Woodland Detectors]

Yes this is normal.

 

[Bart@Big Boys Hobbies]

As was said, Yes it will move freely around. Not sure you would want a fixed toggle. Your would have connection issues.

 

[Born2Dtect]

It can be real wobbly if you do what I did when I got mine, put the upper shaft in wrong. The upper shaft has angled end, when installed the right way, it goes in with the middle connector latch on the under side, this puts the longer metal point of the upper shaft against the control box connector. Give it a good put when seating.

Ed D.