First beach day with 3030

[can]

Nothing great but did find a bunch of clad and a $200 pair of sunglasses. My question is why after pinpointing target and recovery the machine begins falseing. So I had to turn the machine off and restart. What am I missing? What am I not doing? or What am I doing wrong?
Thanks for the help.

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[penzfan]

Nice find there can. Not quite sure what youre saying regarding the falsing. Does it false after every target you recover?

 

[Bquamb]

Let's do the checklist.

Ground balance - OFF
sitting the coil in the water with salt water mode - ON
While in the water - Top button EMF stabilize
Mode : Ferrous coin / High trash to flip between, unless you don't have much black sand, in which case use Ferrous coin/ low trash.
And for pinpoint, I only use sizing and Lock OFF.

I don't have many problems, but they do false on iron often.

 

[can]

Nice find there can. Not quite sure what youre saying regarding the falsing. Does it false after every target you recover?

I hit a target, then I pinpoint it with the trigger, dig the target. When I start back hunting I start getting alot of falseing. Turn it off, start it back up, everything is ok until I pinpoint another target. I had to do this about 6-7 times.

 

[can]

Let's do the checklist.

Ground balance - OFF
sitting the coil in the water with salt water mode - ON
While in the water - Top button EMF stabilize
Mode : Ferrous coin / High trash to flip between, unless you don't have much black sand, in which case use Ferrous coin/ low trash.
And for pinpoint, I only use sizing and Lock OFF.

I don't have many problems, but they do false on iron often.

Thanks for the help bquamb. I will try those setting next time out.