My Excalibur

[NC Digger]

Just got home from a great vacation
Visiting family up north. Now I want my
Excalibur to last for years to come. I have
Silicone spray and wanting to give her a
Spray down. Do you people spray it with
Something special or just the run of the mill
Silicone spray.

Thanks!
HH !

Posted from my phone since my Internet is out.

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[OBN]

I use McNett, but just start this season a little different. I still spray with the silicon spray under the knobs and the head phone cord but I've been hand coating the coil cable with silicon grease about every two weeks. I hunt a lot, 3 to 4 days a week in brackish water and 3 to 4 hours a hunt. It's alittle messy but so far all is going well. After washing I'll let it dry, take the coil off the shaft then coat every curl well. I think any would work but I use the Dow Corning 111. I've also come up with a new idea on the headphones using the Dow 111 on the piezo's so they are unrestricted (louder) and protected by the silicon grease. That's still in the works, and testing.

https://www.walmart.com/ip/Gear-Aid...9935&wl11=online&wl12=158460567&wl13=&veh=sem



Dow Corning Molykote 111 Valve Lubricant and Sealant lubricant for rubber and plastic O-rings | DC111-5OZ

 

[NC Digger]

I do have the dow 111 silicone grease. I have liquid wrench
Silicone spray. I'll spray with the lw. But look for the McNett.
Thanks for the reply OBN!

 

[drafter]

Thanks for the silicone tip.

 

[NC Digger]

Looks like I just found my new spray. I'm waiting for this to come in before I spray down my Baby!
Looks like it would be good for the ctx too!

Thanks OBN!