Simplex Update new manual needed

eman1000

Hero Member
Feb 24, 2016
728
1,105
Elizabethtown, IN
Detector(s) used
XP Deus ORX, Etrac, F75, Simplex, MX5, V3i, Equinox, Tesoro Vaq, F22
Primary Interest:
All Treasure Hunting
1. Sensitivity Level 7 has been added to provide extra depth.
Please keep in mind that the device may run noisier at this level depending on conditions and that this is totally normal.
2. An extra mode has been added - Park 1.
The Park mode on the previous versions has been named as Park 2 on this update and a new Park 1 mode has been added.
Park 1 is relatively deeper but a bit slower than Park 2 mode.
In this mode, the device produces a low tone for ferrous targets with 0-15 IDs, a medium tone for gold and non-ferrous metals with IDs 16-69 and a high tone for non-ferrous metals with IDs 70-99 such as silver, brass and copper.
3. Changes have been made for the All Metal Mode changes:
* It has been removed from the first spot in the options and moved to the end.
* Threshold setting has been added to this mode.
In the All Metal mode, the threshold setting for each sensitivity level is optimized to provide the best performance on different terrains.
You can adjust the threshold setting between -50 +50 based on ground conditions.
4. Mineralization bar has been added to the screen.
5. Timeout lengths have been increased.
6. BACK function (up arrow) has been added to exit from settings to go back to the main screen without waiting for the timeout.
7. ID depth has been increased.
8. 4 levels have been added to Automatic Brightness shown as A1-A2-A3-A4 on screen.
9.Audio for the pinpoint mode and wired headphones has been optimized.
10. Manual Ground Balance function has been expanded:
If the device receives a lot of noise and/or emits false signals and you cannot eliminate it by reducing the sensitivity, first set your sensitivity back to its original level. Then increase the ground balance value between 90.1 - 91.0 one by one until the noise is eliminated. As the ground balance value is increased, the device's sensitivity to high conductive (silver, copper etc.) coins will decrease.

The addition of the new park program is significant - IMO they could have just deleted the old park program. Also the up arrow feature is also nice

You should check out the Nokta Simplex+ group on FB for more info.
 

OP
OP
Gare

Gare

Gold Member
Dec 30, 2012
7,456
14,030
Canton Ohio Area
🏆 Honorable Mentions:
2
Detector(s) used
Presently using Deus 2's & have Minelabs, Nokta's Tesoro's DEus's Have them all . Have WAY to many need to get rid of some
Primary Interest:
All Treasure Hunting
Thanks Eman1000 but it has been 10 days since the last up0date and Nokta could have a new manual out for all
 

Richard Guy

VETERAN
Dec 19, 2019
663
1,303
Virginia
Detector(s) used
Whites Coinmaster
Bounty Hunter 202
Nokta Simplex +
Nokta Legend
Nokta PulseDive
Primary Interest:
Metal Detecting
The paperwork is always the last thing done anywhere. Nokta could have waited to release everything in one bundle. The update notes and the hard-copy manual just about says it all. Regarding Mode 2, I am happy that they kept it since the target-to-target recovery is way faster than Mode 1
 

OP
OP
Gare

Gare

Gold Member
Dec 30, 2012
7,456
14,030
Canton Ohio Area
🏆 Honorable Mentions:
2
Detector(s) used
Presently using Deus 2's & have Minelabs, Nokta's Tesoro's DEus's Have them all . Have WAY to many need to get rid of some
Primary Interest:
All Treasure Hunting
I was helping a friend today and updated her simplex to 2.77 A lot of times when pressing the pinpoint button we could not get it to clear as to being able to use a pinpointer. We would not hold it as to pinpoint with it. What i finally did was take it back and re program the detector and then it started operating properly! Has anyone else had this issue ?
 

Top Member Reactions

Users who are viewing this thread

Top