Need help replacing disc pot on Fisher cz5
Welcome guest, is this your first visit?
Member
Discoveries
 
Results 1 to 5 of 5
  1. #1
    us
    Dec 2008
    South Louisiana
    33
    14 times

    Need help replacing disc pot on Fisher cz5

    Hi, I broke the stem off of the disc knob on my CZ5. Can anyone advise me on how to remove the control box lid to replace the pot. Any advise is greatly appreciated. Thanks, Don

  2. #2
    Charter Member
    us
    Deep1

    Dec 2018
    Carolina Lowcountry
    XP Deus, Nox 800, Garrett Sea Hunter Mark II, Poor ole wore out Fisher 1266 that still finds stuff.
    371
    816 times
    All Types Of Treasure Hunting
    Not familiar with the CZ, but it looks similar to my 1266.
    The box is 1 piece, it does not come apart.
    Remove the 2 screws next to the coil connector and you might have to remove the nut from the charger connector.
    Everything should come out from the front.
    If it's old, I'll dig it, dive on it, detect it or sometimes when I get lucky just bend over and pick it up.

    "Nothing in life is so exhilarating as to be shot at without result" Winston Churchill

    The truth I do not stretch or shove
    When I state that the dog is full of love.
    I've also found, by actual test,
    A wet dog is the lovingest.
    Ogden Nash

  3. #3
    us
    Dec 2008
    South Louisiana
    33
    14 times
    Thanks very much for the info Deep 1. Now I have to get up enough courage to do it! I'd like to Deoxit the other pots when I get in there and clean the circuit board also. Not sure what to use to clean the board. Thanks again, Don

  4. #4
    us
    Jan 2004
    Austin
    Minelab Sovereign GT Nokta Makro Simplex
    39
    you could use alcohol and a natural fiber paint brush. By the time you put it back together, it should be dry.

  5. #5
    OBN
    OBN is offline
    us
    Dec 2008
    Maryland Waters
    "Excalibur".. "AQ" Impulse
    6,218
    6227 times
    Honorable Mentions (1)
    Got a good friend who worked on one of my Fishers, Rebel Metal Detectors in SC. Steve was a Fisher Service Center. Good Guy to know, fair priced, and a good old southern boy.

    Blood Member of RingKeepers
    2020......Gold Rings....69....Misc Gold 1 .......Silvers ...104







 

 

Home | Forum | Active Topics | What's New

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Fisher F75 disc questions
    By dhearn in forum Fisher Research Labs
    Replies: 2
    Last Post: Jan 22, 2012, 08:51 AM
  2. Fisher F75 disc questions
    By dhearn in forum General Discussion
    Replies: 3
    Last Post: Jan 09, 2012, 03:16 AM
  3. Pro mode, Zero disc, Sens 4-5 bars, Iron disc at 35.
    By Bart@Big Boys Hobbies in forum Garrett
    Replies: 1
    Last Post: Apr 03, 2011, 12:15 AM
  4. replacing headphone
    By mlayers in forum White's
    Replies: 1
    Last Post: May 09, 2009, 10:18 PM
Powered by vBadvanced CMPS v4.3.0