3 Rings clad lock watches aect AT PRO and pro pointer Balncing works great in MI

[A2coins]

Found these first 2 rings today on an old hill 1 is 925 silver the other has no markings and through a jewelers loop has no pits and is much shinier than the 925 silver ring and heavier but no markings on it ? any guesses it did ring up 47 on the AT PRO also lots of trinkets enjoy the pics. I also got a 1905 v nickle not pictured its soaking I find much more when I ground balance AT PRO with sensitivity turned down 2 notches then turn GB down by 8 then turn up sensitivity seems to work excellent in I'm my area. I also learned with the pro pointer if I find the target to keep the pointer in the hole turn it off then back on and it narrows the signal to right on it instead of beeping the whole time its in the hole. These are my finds today and last week end. I hesitate to post some time cause I see all these great finds like some one just dug up a museum or found Paul reveres pocket book lol Thanks for looking

 

Amazon Forum Fav 👍

Treasure of Victoria Peak - Grab it through Amazon!

[BigWaveDave]

Nice score on the rings...47 on the Pro?... gold?

 

[A2coins]

Nice score on the rings...47 on the Pro?... gold?

I thought it might be gold it has no markings but I just saw a post by captnken that has the same ring his is marked 925 mexico If its silver it would hit around 80 VDI 47 is gold foil range Ill have to get it looked at. Thanks Dave HH

 

[Mzjavert]

A watch is still on my to find list. You scored two in a few days. Nice. Love the Volkswagen, that was my first car. Congratulations on all your sweet finds.

 

[Professor of Engineering]

Congratualtions on the very productive hunt!

 

[The Urban Prospector]

47 on the AT Pro with a ring that size is either stainless steel or platinum... Being that platinum is almost always marked, I would lean more towards stainless. It would be interesting to know the weight. I am rootin' for platinum!!!

 

[dirtlooter]

great finds, an acid test kit is around $10-15. grounding the pro pointer helps gigantically

 

[A2coins]

47 on the AT Pro with a ring that size is either stainless steel or platinum... Being that platinum is almost always marked, I would lean more towards stainless. It would be interesting to know the weight. I am rootin' for platinum!!![/QUOTE The weight is 4.96 g

 

[A2coins]

4.96 g weight!!

 

[against the wind]

Congrats on the double ringer.
The "47" has the look of gold to it. It's in the right VDI range also. Good luck Tommy,, I hope it's gold.

 

[The_Piratess]

Congrats on all of the great finds!!! Thanks for the good info too.

 

[Loco-Digger]

Glad to see your still swinging the coil and pulling good targets A2, keep the posts coming.

 

[trapperart]

Congrats on some nice finds, hope the ring is something good

 

[sturrat]

With it only weighing nearly 5 grams that would be stainless. A platinum of gold ring of that size would be closer to 8 grams

 

[sgtled3533]

Possibly tungsten?? I've found 3-4 tungsten rings and I believe the ring up around the 50s on the gold bug pro detector. Also I've noticed that all of my tungsten rings, (even my wedding band) don't have engraved markings on the inside like a gold or silver ring usually does. They usually have like almost a printed hallmark on the inside, usually with the manufacturer name and "tungsten " somewhere in there. Could have possibly rubbed off? Who knows! Like the others said though, I'll keep my fingers crossed for platinum!!! Wouldn't that be nice [emoji106]🏻 keep us updated!

 

[rollaz]

Congrats. I quitted to use NEL coils as I discover it does not works on deep iron signals...

 

[stewielouie]

Possibly tungsten?? I've found 3-4 tungsten rings and I believe the ring up around the 50s on the gold bug pro detector. Also I've noticed that all of my tungsten rings, (even my wedding band) don't have engraved markings on the inside like a gold or silver ring usually does. They usually have like almost a printed hallmark on the inside, usually with the manufacturer name and "tungsten " somewhere in there. Could have possibly rubbed off? Who knows! Like the others said though, I'll keep my fingers crossed for platinum!!! Wouldn't that be nice [emoji106]🏻 keep us updated!

Doubt if its tungsten, it reads around 70+ on the at pro, nice finds though.

 

[A2coins]

I scanned it again with my At PRO 43 44 all day long Ill check it out tomorrow and post the results./