Carbon-fiber shafts for Equinox, CTX, Excal/Sov, & Garrett AT/ACE (black AND colors)!

[sgoss66]

Hello all!

I just wanted to post an update; our premium-quality carbon-fiber shafts are available for a variety of different machines now. Customization is always available, and we continue to expand our offerings -- including COLORED carbon-fiber shafts for all models!

**Equinox carbon-fiber shafts are currently in stock and available in standard "black" color, with a couple of colored ones also available from the last "limited edition" production run. Counterweights are also in stock, as are "Herke" arm cuffs.


**CTX 3030 lower rods are also in stock/available -- and are now being offered in COLORED carbon-fiber options, in addition to the standard black! (See picture below, of a few of the available colors.)


**Excalibur and Sovereign shafts are also now available, on a custom basis.


**Finally, two-piece carbon-fiber lower rods for Garrett's AT- and ACE-series detectors are newly available now, as well -- in both standard black, and colored options! Contact me for more details! (See pictures below, of a few of the available colors.)


Please note that while only limited quantity of colored shafts currently remain in stock (for all models), a large colored tube order will be placed within the next week. SO -- if you have a specific color you are interested in -- for your Equinox, CTX 3030, OR your AT- or ACE-series units, please let me know, and I'll be sure to include it in the upcoming colored tube order!


THANKS!


Steve

Steve's Detector Rods, top-quality carbon-fiber metal detector shafts and rods
www.facebook.com/stevesdetectorrods
Steve's Detector Rods

email: steve@stevesdetectorrods.com


CTX 3030 colored lower rods (other colors also available for order)...





Green/Black Garrett AT-/ACE-series shaft...





Garrett AT-/ACE-series colored "middle" shaft sections (the lower rod section is included, but not pictured here; other colors also available for order)…

[sgoss66]

Hi all! Just wanted to report that a large re-supply of parts for the next production run of shafts are all due in by the end of the upcoming week. So, if you are interested in an Equinox shaft (upper, lower, or both, in black, or colored carbon fiber), a CTX lower rod (black, or colored carbon fiber), a two-piece lower shaft for your Garrett AT/Ace unit (black, or colored carbon fiber), or even something for an Excal or Sovereign, this is a great time to let me know, and I'll mark you down and reserve the shaft you need.

I'm also working on prototype two-piece lower rods for White's MX series machines, and I'll have the first of my sand scoop handles ready very soon, as well (the first ones optimized for T-Rex scoops).

Thanks!

Steve
Steve's Detector Rods, top-quality carbon-fiber metal detector shafts and rods
www.facebook.com/stevesdetectorrods

[Rad1sh]

Hoping someone makes a Simplex and Amfibio carbon fiber shaft soon.

[RustyGold]

You can’t go wrong with Steve’s products. Well thought out with an incredible warranty!

[sgoss66]

THANKS for the very kind words, Rusty!

Rad1sh -- one difficulty with the Nokta/Makro shafts, in terms of producing a good aftermarket carbon-fiber option, is that (if I am not mistaken) they are not round tubes, correct?

Thanks,

Steve

[hunt2day]

Steve has the best quality rods and his counter weight system for the Equinox is incredible. But most important is that he takes pride in producing a quality functional product and his customer service is unbelievable. Trust me this guy wants to keep his customers happy and he is just a great all round person. If you purchase one of his products you will not regret it !!

[sgoss66]

Holy cow, sir -- what a terrific endorsement! Thank you very kindly! I appreciate it!

Steve

[dirtdigginfool]

Hello Steve...ive been looking for an excuse to bling out my AT Max with a carbon fiber shaft... didn’t see any Garrett stuff on your site... what do you have available? You can send me the proper link in case I fat-fingered it... thx Ddf Scotty.

[sgoss66]

Scotty,

Thank you for your interest! I am sorry -- I don't have the website updated yet, to show the new Garrett shafts. It's in the works, I promise! I have a bit of info on my Facebook page, but so far most of the info on the Garrett shafts has been posted on the forums.

If you look farther up in this thread, the last couple of pictures are of the Garrett shafts. Basically, they are two-piece shafts that replace the lower two sections of your stock shaft -- with the shaft attaching seamlessly to your Garrett upper s-shaft. No modifications or anything; my "middle" shaft section uses the Garrett cam lock components for attachment, just like the stock middle shaft does (as you can see in the picture above with the four middle shafts). But, the two lower sections of my shaft attach to each other using my heavy-duty clamp-type cam lock -- which permits quick, easy adjustment of your lower rod length, and to ANY adjustment length you prefer, as there are no fixed button holes to restrict your adjustment lengths.

I have the shafts in both black, and a few colored options as well (a few of the colors shown in that "middle shaft" picture above). I'm waiting again for additional carbon-fiber tubes to arrive, but will be happy to provide you with a shaft, if you are interested, as soon as I get those parts. Feel free to send email, if you would like more info, pictures, or have any additional questions.

THANKS!

Steve
Steve's Detector Rods, home of Equinox and CTX 3030 carbon-fiber shafts and rods
www.facebook.com/stevesdetectorrods
email: steve@stevesdetectorrods.com

[hunt2day]

Steve,

Just want you to know I received the part today. Great service and extreme kindness.
Thanks !!!!
Bill (Hunt2day)

[sgoss66]

hunt2day -- outstanding! Thanks for letting me know! Glad to help!

Steve