HuntinDog
Bronze Member
- #1
Thread Owner
Hi all fellow Deus owners. One of the main complaints I had with my Deus is when I put it down to retrieve my target my Deus would roll down the hill or would be setting in the mud! Well I designed a non-permanent stand for my Machine. Cost about $5 and is easy to build out of PVC. If the pictures post as I've played them out... The first pic is the pieces needed. The only "odd" piece is you need a 3/4 X 3/4 x 1/2 T. The second pic is the parts set out for assembly. You will need to cut the 3/4" slot to the 3/4 x 3/4 x 1/2 T and cut off the 3/8" of both T's before you glue the parts. The third picture shows the notches and slot cut in the T to hold the zip ties. The slot is so the pipe will compress around the shaft of the handle. The forth pic is my stand mounted. I also put some of that non-skid bumpy rubber stuff you put in your RV shelves in the belly of the T to help it to not slip around. I hope this all makes sense and helps out. I know it has worked great for me. Ok so it looks like the pictures are moved around a bit, but I'm sure you get the idea. HH
