Another Search Coil Question.

[Davers]

Will a 15" loop 'the guy said it was for a f75ltd' Would this loop be compatible with my old 1266X?
Thanks in advance for any reply's.
Davers

 

Amazon Forum Fav 👍

Treasure of Victoria Peak - Grab it through Amazon!

[fjs440]

I doubt it. Both detector's working frequencies are very different. The 1266X's 4.8 KHz is far different than 13 KHz of the F75. My F2's 5.9 KHz is closer than the 1266X and my F2 coil is a disaster on my F70, which has the same frequency as the F75.

Plug it in and try it if the fittings are the same. See how it compares to a 1266X coil. If the fittings are not the same, don't bother making modifications. I believe you would be wasting your time. Try it and see.

 

[Davers]

I doubt it. Both detector's working frequencies are very different. The 1266X's 4.8 KHz is far different than 13 KHz of the F75. My F2's 5.9 KHz is closer than the 1266X and my F2 coil is a disaster on my F70, which has the same frequency as the F75.

Plug it in and try it if the fittings are the same. See how it compares to a 1266X coil. If the fittings are not the same, don't bother making modifications. I believe you would be wasting your time. Try it and see.

Thanks
I knew the f75ltd was a Hot machine, thought the 1266X ran at a higher feq, as it almost Mirrors my Tejon in it's Sensitivity to small targets like 22 bullets , 22 cases ,foil ,etc.
Thanks again i'd have to drive 100 miles to check the connectors. I did not think they would be in the same 'Zone'.