Anti flip searchcoil holder

[Orfee]

for anyone tired of flipping their coil back down while hunting in water here is an inexpensive solution. take a piece of clear plexigass shape it using a heat gun and drill 4 holes through it to attach it to detector rod with strap ties

 

Amazon Forum Fav 👍

A Handbook of Civil War Bullets and Cartridges - Grab it through Amazon!

[bigscoop]

Quick Coil Flip Cure | treasurelagoon

Here's a similar option, using just a section of nylon coat hanger, can be bent with just some boiling water.

 

[Terry Soloman]

..or duct tape until you get your technique down and it doesn't happen so much anymore.

 

[Beach Papa]

I tried something similar, except it was a brace that went from the shaft to the front of the coil. Only problem, although I thought I had it locked down tight, the brace rubbed against the coil and almost wore a hole through the coil before I realized what was happening. Sand. water. rubbing back and forth from the pressure of the water = hole in coil. Be careful.

 

[bigscoop]

..or duct tape until you get your technique down and it doesn't happen so much anymore.

Once is too much for me.....lol

 

[bigscoop]

I tried something similar, except it was a brace that went from the shaft to the front of the coil. Only problem, although I thought I had it locked down tight, the brace rubbed against the coil and almost wore a hole through the coil before I realized what was happening. Sand. water. rubbing back and forth from the pressure of the water = hole in coil. Be careful.

Not in the picture, but I use a piece of clear rubber tubing slid over the nylon.....works great and prevents the very problem you mentioned.

 

[Jason in Enid]

I know White's used to sell a good one that fit their detectors. Mine worked great while I was still using my White's PI.