Any guesses?

[LandSeig]

Made it out detecting today. The thing on the left has a brass head, the other thing is cast with newton New Haven stamped on the inside. It’s about 4”by 1.5”

 

Amazon Forum Fav 👍

Agony and Death on a Gold Rush Steamer: The Disastrous Sinking of the Side-Wheeler Yankee Blade - Grab it through Amazon!

[Digginitdaily]

Made it out detecting today. The thing on the left has a brass head, the other thing is cast with newton New Haven stamped on the inside. It’s about 4”by 1.5”View attachment 2102891View attachment 2102892

I found a smaller br/on piece the other day ! I think mine was a watch winder. But yours looks like a stopper for a bottle perhaps. The cast object I'd say is a mirror or part of a light. Take a picture of each and send it to Google lens ! Bammm! Problem solved! .... sometimes

 

[villagenut]

That maker mark is associated with Newton die casting....that's a start anyways.

 

[robertk]

Looks like a rear view mirror out of an old car, though there's no obvious attachment point.

 

[Digginitdaily]

Looks like a rear view mirror out of an old car, though there's no obvious attachment point.

It could just be a reflective part. I've seen old miner lights that had a reflector behind the light source

 

[LandSeig]

I was thinking it may be a ball joint or something. Like a tie rod maybe. The top is brass and the bottom looks like threaded iron.

 

[Sandog]

Is that a bracket on the back of that piece?

 

[LandSeig]

Is that a bracket on the back of that piece?

I’m not sure, it’s a raised area with lines in it.

 

[Rooster 777]

Made it out detecting today. The thing on the left has a brass head, the other thing is cast with newton New Haven stamped on the inside. It’s about 4”by 1.5”View attachment 2102891View attachment 2102892

Looks like the front half or the face of a very old Golf driver head.

 

[Digger RJ]

Made it out detecting today. The thing on the left has a brass head, the other thing is cast with newton New Haven stamped on the inside. It’s about 4”by 1.5”View attachment 2102891View attachment 2102892

Nice!!! Congrats!!!