AT MAX or EQUINOX 800

[Khines85]

Just getting poeple input of which one they would get. I hunt old home sites old schools ect mostly for silver coins some areas are pretty trashy tho thanks for the input

 

Amazon Forum Fav 👍

Treasure of Victoria Peak - Grab it through Amazon!

[BigWaveDave]

Best to research on your own, YouTube vids, reviews, pros and cons of each machine, package deals with supporting vendors... the list goes on.
Generally when you ask here on Tnet which is better, you’ll get a pissing contest amongst guys who are loyal to their brand.
With that being said, get the maxx.

 

[Khines85]

Oh I’m sure they do I have a at pro now and I’ve had good luck with it just didn’t know if any of those two would give me any better performance and or a inch or two more depth

 

[BigWaveDave]

I got a Pro too, and the maxx is deeper for sure. Learning curve very easy once you’ve mastered the Pro.
The VDI numbers are jumpy and more inconsistent with smaller, deeper targets, but you’ll learn that.

 

[BigWaveDave]

And FWIW, BART at Big Boy Hobby’s is rolling out a special on the nox....
Like I said, research what’s gonna be best for you.

 

[Tpmetal]

I hunt mostly cellar holes and the at max is very similar to my mx sport. i got the nox800 recently; and I can see noticeable improvement in places I have pounded, not only in the past but places I've pounded this year.. The sport has been no slouch either, I have killed it with that Machine. I do like the 800 sounds better than the mx sport and garret sounds as well. the key is getting the smaller coil for the cellar hole sites, which is next on my list for the 800.

 

[SD51]

Sounds like a zero learning curve by getting the Max vs learning the Nox....

 

[Hawks88]

Definitely a learning curve with the nox.

 

[cudamark]

Other than the ease of transitioning from an AT to the Max, I don't see any advantage the Max has over an Equinox. Maybe someone here will enlighten me?

 

[Normsel]

I have had the AT Pro and have both the Equinox 800 and 600 and my preference is the Equinox but my advice is go with your gut after you do your research.. Your gut is rarely wrong

 

[BigWaveDave]

Other than the ease of transitioning from an AT to the Max, I don't see any advantage the Max has over an Equinox. Maybe someone here will enlighten me?

https://www.garrett.com/hobbysite/hbby_at_comparison_chart_en.aspx

I have found coins up to 6 inches deeper with the maxx.

 

[XTerraman]

And FWIW, BART at Big Boy Hobby’s is rolling out a special on the nox....

I just checked Big Boy Hobby and did not see any special on the nox.
What do you believe the special will be?

 

[BigWaveDave]

I just checked Big Boy Hobby and did not see any special on the nox.
What do you believe the special will be?

I don’t know, I didn’t look at it... but here is his post from yesterday...
http://www.treasurenet.com/forums/big-boys-hobbies/584818-minelab-equinox-800-stock-ready-ship.html

 

[HighVDI]

IMO, this shouldn't even be a discussion on which is more capable. You have one machine at 13Khz and one that runs multi frequency. One machine is a hair better than average at best on recovery speed and one that rivals the fastest on the market.

I have a handful of machines and if I could only keep one it would be my 800. The reason why is because I went back to places I had hit.....and my friend hit (with his pro and max) and recovered many keeper coins! It's subjective but that's my opinion on it.

 

[buck8point]

Best to research on your own, YouTube vids, reviews, pros and cons of each machine, package deals with supporting vendors... the list goes on.
Generally when you ask here on Tnet which is better, you’ll get a pissing contest amongst guys who are loyal to their brand.
With that being said, get the maxx.

Well Played Dave... Well Played... lol
Also Great Advice...
What he said...

 

[buck8point]

Oh I’m sure they do I have a at pro now and I’ve had good luck with it just didn’t know if any of those two would give me any better performance and or a inch or two more depth

In my opinion, performance has a LOT to do with how well you know your machine... and that can make a bigger difference that what actual machine you may choose.. they all have good and less than good points..

 

[buck8point]

Sounds like a zero learning curve by getting the Max vs learning the Nox....

Depends on what you may have been upgrading from... i had a ACE 250 before i bought my AT Max and It took me a while to get to know it like i needed to, but not too bad..

 

[Professor of Engineering]

Hello Khines85,

BigWaveDave has some good advice. If you have a metal detector store or local club, perhaps you could "test drive" the models you have researched. The main thing is to research the desired machine that fits your budget and hunting style. Whatever machine you decide on; spend the time to really learn it. This means settings and how they are interrelated and affects of one on the other.

GL & HH

Doc

 

[vpierceiii]

Good morning
I’m new to this forum....first post. I’ve been using an F5 for the last 5 yrs or so. And I want to upgrade so this thread caught my eye. I live near Placerville Ca so I enjoy coin shooting and I’d like to look for some good. Since both models discussed will be new to me, I’ll have a learning curve either way.
Which of the two models would you suggest for someone like me?
Thank you!

 

[XTerraman]

I have researched both the AT Max and the Equinox 800 extensively through written reviews, field tests, watching YT videos and user opinions. There are several good videos on YT about both. For me, I have decided on the Equinox 800 over the AT Max because of the multi-frequency setup. better in noisy iron soils, better in trash, goes deeper, has better tones, better wireless ( less noise producing) and it four modes, including the gold mode. The 11" coil may not be best, but the 6" will help in tight places.... And, lastly, because I have a X-Terra 70, the display is familiar to me. I only wish that the price of the 800 was $800 and not $900. But, to me it is a better machine than the AT Max.