AT Pro Emulator?

[jbarry]

I was told that there was an Emulator for the AT Pro like the one for the E-Trac. That was news to me and I have not been able to find one. Any suggestions??

 

Amazon Forum Fav 👍

Treasure of Victoria Peak - Grab it through Amazon!

[mindcrime1988]

I do not own any Minelab detectors and know very little about them so forgive my stupidity. But I did a little bit of research and if I am reading correctly, the Emulator you are speaking of is a computer program to help you learn your detector? I am not aware of any program like this for the AT Pro. There are many instructional videos out there to learn from but I'm sure just about everybody will agree with me that the best way to know your AT Pro is to get out there and learn it the old fashioned way. It really is a simple machine and just takes some practice & patience. This might not be what you wanted to hear but there are many talented folks on this forum who are wiling to help if you have any questions.

 

[Geobound]

The AT Pro has got to be one of the easiest machines to learn.

It truly is a take it out of the box machine and go.

Across the top of the display pad it even tells you what signal numbers to look for.

As suggested, check out all the YouTube videos.........or at the very least go to the Garrett site and watch theirs.

After that if you have any question pop back in, there are loads of us that can help.

 

[John-Edmonton]

There is no Emulator on any Garrett Metal Detector.

 

[RobRieman]

Those emulators are a complete waste of time. You can grab a VDI chart to get in the ballpark on what some items ring in as but the real world will tell you different.

 

[cooper1841]

I was excited to have all these options when I got my Etrac....set it all up played with it....................have never used it in four years! I agree with Rob