Button, Bullet, and Hand Saw Pendant

SilverPirate

Sr. Member
Joined
Dec 23, 2012
Messages
414
Reaction score
131
Golden Thread
0
Location
Boerne Tx.
Detector(s) used
New Minelab E-Trac with Sunray probe, Garrett Ace 350, Teknetics Delta, Garrett Pro Pointer
Primary Interest:
Metal Detecting
I have a button that I would like to have a timeframe on.

ForumRunner_20130112_201550.webp



ForumRunner_20130112_201608.webp

Then I have have a bullet. I can't see any ridges on the ring.

ForumRunner_20130112_202604.webp



ForumRunner_20130112_202616.webp

Then I have the best for last! I know it's a pendant off of a saw but I can't find a timeframe for it.

ForumRunner_20130112_202832.webp



ForumRunner_20130112_202845.webp

Thanks for looking and HH

SilverPirate
 


"Warranted Superior medallions are found on secondary lines manufactured by Disston and other major saw makers with other brand names on the etch. Some smaller 19th century saw makers may have bought sawnuts and medallions from the bigger factories.

After 1900 or so the "small guys" were actually secondary lines of the "big guys." The small companies were bought up by bigger ones and some of their products were continued for a time. Harvey Peace is one example. Most American saws from the 20th century, regardless of brand name, were made in the works of Disston, Atkins, Bishop, or Simonds.
In the case of Disston, their replacement medallions were stamped Warranted Superior rather than "Disston." I would speculate their rationale was they didn't want their name on lesser-quality saws. Brand identity and loyalty in the U.S. was much stronger in the first half of the 20th century than it is today."

disstonian institute
 

Upvote 0

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom