Coil repair person

[mtdoramike]

I have a Fisher Coin Strike 8" coil which stopped working. I called Fisher/First Texas, which kind of said good luck with that one since the Coin Strike is an obsolete model. So anyone know of someone who fixes coils?

 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!

[Treasure_Hunter]

Is coil waterproof? Have used it in any water?

 

[mtdoramike]

yes, coil is water proof. haven't used in water in years.

 

[mascard1]

Those things are built like a rock.

 

[Ism]

I looked at images for the coin strike coil online but didn't see the connector in the images. Other Fisher coils appear to have a metal DIN connector which can be disassembled. If you are feeling capable and have the tools, you could take the DIN connector apart and look at the solder connections to see if you have any corroded, broken, or shorted wires. If your problem is in the coil, there is probably little hope for repair.

 

[mtdoramike]

I looked at images for the coin strike coil online but didn't see the connector in the images. Other Fisher coils appear to have a metal DIN connector which can be disassembled. If you are feeling capable and have the tools, you could take the DIN connector apart and look at the solder connections to see if you have any corroded, broken, or shorted wires. If your problem is in the coil, there is probably little hope for repair.

I removed the connector and checked the connections, which seem to be solid. The only thing I can figure is the must be a break either in the wiring or in the coil. Either way, I've done as much as I can do with it.

 

[michael NY]

I have a Fisher Coin Strike 8" coil which stopped working. I called Fisher/First Texas, which kind of said good luck with that one since the Coin Strike is an obsolete model. So anyone know of someone who fixes coils?

Maybe a frayed wire a lot of the coil wires from fisher had that issue. Good luck

 

[Treasure_Hunter]

yes, coil is water proof. haven't used in water in years.

Reason I ask is that If a coil has a very tiny leak in salt water it can take couple years for it to go bad, it slowly fails as the windings rust until it finally rust through a strand, I have had one fail that way myself....Just a thought.

 

[Ism]

I removed the connector and checked the connections, which seem to be solid. The only thing I can figure is the must be a break either in the wiring or in the coil. Either way, I've done as much as I can do with it.

If you have an ohmmeter, you could compare it to your good coil by testing the pins. Once you find out the pins that have continuity in the good coil, then you can compare the bad coil and see which pins have a broken connection. Then while the meter is still connected, work your way down the cable bending small sections into a U shape (various directions) while watching for the meter to show continuity. If the break is in the cable and at least 1 inch (25mm) above the coil housing, it can be repaired.

 

[mtdoramike]

Reason I ask is that If a coil has a very tiny leak in salt water it can take couple years for it to go bad, it slowly fails as the windings rust until it finally rust through a strand, I have had one fail that way myself....Just a thought.

that is a strong possibility, since I used it down in the Islands on the beach for a few years and even at the waters edge.

 

[mtdoramike]

Unfortunately, I don't own nor know how use an ohmmeter. When it comes to electrics, on and off is about my limit of expertise.

 

[Carl-NC]

If the problem is in the coil itself, you can't fix it. The coil is potted in epoxy. OTOH, being potted in epoxy makes it unlikely the problem is in the coil. More likely it's in the cable or the connector. You say the connector looks fine, so now it's down to the cable. It's possible to splice in a new cable but it's tough to do right and making it waterproof is even more difficult. Ism is right, first thing to do is measure the coil to see what you've got.

 

[bartholomewroberts]

Check with a man named Sven up in Ontario.. he is the best I know

 

[Treasure_Hunter]

If the problem is in the coil itself, you can't fix it. The coil is potted in epoxy. OTOH, being potted in epoxy makes it unlikely the problem is in the coil. More likely it's in the cable or the connector. You say the connector looks fine, so now it's down to the cable. It's possible to splice in a new cable but it's tough to do right and making it waterproof is even more difficult. Ism is right, first thing to do is measure the coil to see what you've got.

I said coil windings might have rusted if leaked because sometimes when windings were covered in Epoxy not all windings were covered completely. I have cut open dead coils when in the repair center and found windings sometimes exposed and rusted though..

 

[mtdoramike]

Check with a man named Sven up in Ontario.. he is the best I know

Ok, how do I do this, send smoke signals? I'm sure there re more than one Sven in Ontario.

 

[Treasure_Hunter]

Ok, how do I do this, send smoke signals? I'm sure there re more than one Sven in Ontario.

Don't know if it is same person, but there is a Sven on Friendly and I believe he is from Ontario.

 

[bartholomewroberts]

Ok, how do I do this, send smoke signals? I'm sure there re more than one Sven in Ontario.

http://www.canadianmetaldetecting.com/phpBB3/memberlist.php?mode=viewprofile&u=964

treasurelinx@yahoo.com

 

[mtdoramike]

Thanks for the link, I decided to chunk it. I found a place where I can buy a Fisher ID Edge coil, which will work on the C$ without any mods, but the price is $143.00. I'm on the fence about investing $143.00 in an old obsolete machine

 

[Carl-NC]

I called Fisher/First Texas, which kind of said good luck with that one since the Coin Strike is an obsolete model.

Funny, I just found out that there are a few NOS 8" ID-Edge coils that they have just tagged for the scrap bin. I am trying to snag you one, if I can I'll send it to you for free.

 

[mtdoramike]

Funny, I just found out that there are a few NOS 8" ID-Edge coils that they have just tagged for the scrap bin. I am trying to snag you one, if I can I'll send it to you for free.

that would be great. let me know if you get one.