crazy spot

tomhighland

Bronze Member
Joined
Sep 26, 2015
Messages
1,419
Reaction score
1,511
Golden Thread
0
Location
In MI woods
Detector(s) used
AT PRO
Primary Interest:
Metal Detecting
Spent the afternoon hunting the practice field at the old school some more. Couple of bucks in clad. Again From 65 forward. Thirty plus hours here, only silver a cheap ring. Close to $ 30.00 total. Did find a 51 wheat. A dime in someone elses bad plug. Then pro zero gave me a deep nickel signal. Right at 10 inches I see the red disc, pull it out and WHAT, A 1924 buffalo. Can barely read it. Sorry the pictures are not better. It is just weird that that was there, and after well over 300 targets still no silver coins. PICT0470.webpPICT0471.webpPICT0472.webpPICT0468.webp:icon_scratch:
 
Upvote 11
You never know what's gonna pop up that's what makes this hobbey so addictive . The surprises are always better than what you expect !! Congratulations on the buffalo!!
 
I got an old courthouse site that has had constant activity on it since 1700s. Ive found lots of clad, a few wheats, a silver washington and three colonial coppers. Thats it. I have no idea why there is no coinage from the 19th and early 20th century. Thats what makes this hobby so interesting
 
Last edited:
It was a fun day and quite a surprise. I did a permission at a house this morning That yielded one clad quarter. Went to the sports field only because I was halfway there already! Strange place though.
 
Congrats on your 1924 Buffalo nickel and beaucoups of clad (clad adds up) - dimes can be hard to find if you don't have a pin pointer anyway thanks for sharing your pictures and story with us and I wish you many more great finds while out dirt fishing.

Texas ED
 
Hard to get Buffaloes with full clear dates.
Congrats on your hunt
 
Nice buff . Congrats
 
Congrats on pulling that Buffalo, I average $1.50 an hour at most places, but have found a few sites where I averaged between $5 & $8 an hour. I pounded the $8 an hour site and gridded it in 3 directions back in 2014. It certainly help my F4 pay for itself. It was a crazy site, a 3 acre park in a small community.
 
Those buffalo's don't seem to hold up very well in the dirt; at least, not in my area. I found one recently that was so bad I didn't even realize it was a coin until I got it home and scraped the crud off of it. I thought it was another old button.

I haven't found many of them but only two have readable dates; one just barely. A good scrub with an SOS will clean them up pretty well without hurting them too bad. Nickel is really hard. Just make sure it's not a key date before breaking out the SOS though.


Here's a before/after the SOS treatment of an old 1899 V nickel I found a while back:


Fisrt V Nickel & More Old Shells Sept. 12, 2014 002.webpFisrt V Nickel & More Old Shells Sept. 12, 2014 001.webp

Tiny pin and Other Stuff Sept.20 2014 004.webp Tiny pin and Other Stuff Sept.20 2014 005.webp

So if you want that Buff' to shine a little, start scrubbing. It took me about ten minutes per side on the V nick and although it's still pitted and in overall horrible shape, I did get some improvement. I'm really careful about cleaning coins but in this case, it was worthless to begin with so there was nothing to lose by cleaning it.
 
Last edited:

Users who are viewing this thread

Back
Top Bottom