ColonelDan
Bronze Member
- Joined
- Jan 19, 2014
- Messages
- 1,008
- Reaction score
- 2,188
- Golden Thread
- 1
- Location
- Central Florida
- 🥇 Banner finds
- 1
- 🏆 Honorable Mentions:
- 1
- Detector(s) used
- Deus II
- Primary Interest:
- Beach & Shallow Water Hunting
- #1
Thread Owner
I've just recently tried this at a relic site and have been quite pleased.
Also using ferrous coin, I set my ferrous line at 13 as a high tone and anything above that gets the low tone. Why 13? Just as a break point that gives me some indication that a high tone target may be one that falls in the proverbial sweet spot of 11-13. Of course, at such a relic site, I dig it all anyway but it does simplify my "tone life" considerably.
Anyone else try this? If so, I'd very much like to hear your comments.
Also using ferrous coin, I set my ferrous line at 13 as a high tone and anything above that gets the low tone. Why 13? Just as a break point that gives me some indication that a high tone target may be one that falls in the proverbial sweet spot of 11-13. Of course, at such a relic site, I dig it all anyway but it does simplify my "tone life" considerably.
Anyone else try this? If so, I'd very much like to hear your comments.
