pulltabfelix
Bronze Member
- Joined
- Jan 29, 2018
- Messages
- 1,054
- Reaction score
- 1,728
- Golden Thread
- 0
- Location
- North Atlanta
- Detector(s) used
- Currently have XP Deus 2
- Primary Interest:
- Relic Hunting
- #1
Thread Owner
Ok, I have the 15 inch coil on my 800 and have heard you need to slow down your recovery speed to 3-4 and swing slowly when using the 15 inch coil.
Does this mean swing slowly after you get a hit and you can swing at your normal speed before you get a hit?
I notice on slow recovery speed it seems to mean just that, a slow recovery after you get a signal. Because the TID value stays on the screen a longer time with a slower recovery speed and the detector won't detect during this recovery period. If I have it right, then if there are no signals say in in an open field, you can swing normally until you get a signal.
need some clarification so I hunt properly with the 15 inch coil on my 800.
Does this mean swing slowly after you get a hit and you can swing at your normal speed before you get a hit?
I notice on slow recovery speed it seems to mean just that, a slow recovery after you get a signal. Because the TID value stays on the screen a longer time with a slower recovery speed and the detector won't detect during this recovery period. If I have it right, then if there are no signals say in in an open field, you can swing normally until you get a signal.
need some clarification so I hunt properly with the 15 inch coil on my 800.