Equinox Headphones these work great $20.01

Roger Mn.

Silver Member
🥇 Charter Member
Joined
Aug 18, 2007
Messages
3,824
Reaction score
1,885
Golden Thread
3
Location
Rochester,Minnesota
🥇 Banner finds
3
Detector(s) used
Minelab Etrac
Primary Interest:
Metal Detecting
Last edited:
As an eBay Associate we earn from qualifying purchases.
How is the lag considering they don't appear to be Aptx or better yet Aptx Low Latency?
 
Hello "Rogerdodger",

Do you happen to know the length of time between charges, and charge time?

Are there any delay issues during detecting?

Thank you,

Doc
 
How is the lag considering they don't appear to be Aptx or better yet Aptx Low Latency?
I used the headset 3 to 4 hours and never noticed any lag . I never though about it while detecting.
 
Last edited:
Last edited:
Hello "Rogerdodger",

Do you happen to know the length of time between charges, and charge time?

Are there any delay issues during detecting?

Thank you,

Doc
No i don't know how long you can use them before you have to recharge them. They come with a red plugin cord so you can plug them in if the battery go's dead.
 
So will these pair with the 800 and 600, nothing else needed, or do you need something else for them to work with the 600?
 
So will these pair with the 800 and 600, nothing else needed, or do you need something else for them to work with the 600?
They should work with both detectors. For the price you can't go wrong.
 
Basically any BT headphones will work, but you can also get BT Version 4.2, IP70 waterproof headphones for around the same price.
 
I am glad to hear that these work well for you, rodger. One thing that I will say though, is that being non aptX low-latency (or even just regular aptX), some folks will likely notice delay on these, which -- for me -- proved troublesome when I tried my regular Bluetooth earbuds on my 800...

Steve
 
☠ Cipher;5784031 said:
Basically any BT headphones will work, but you can also get BT Version 4.2, IP70 waterproof headphones for around the same price.

And with APTX Low Latency too. See the Qualcomm APTX product listing website.
 
I used the headset 3 to 4 hours and never noticed any lag . I never though about it while detecting.

It became very noticeable to me using non-aptx LL headphones when trying to fast wiggle the center of the coil over a target. You did not notice it in that circunstance?
 

Users who are viewing this thread

Latest Discussions

Back
Top Bottom