First time this has EVER HAPPENED to me in over 50 years of Detecting

[Gare]

I was at a park camp ground with my horses . We were camping and i decided to test out my Deus 2 with the 9 inch coil running version .071 . I was running the XY program. I got ther bar line in the proper areas. I looked in the top left and seen the 92 to 93 id numbers. I got down with my hand Digger and cut about a 8 inch plug about 6 inches deep. I then took my pinpointer and stuck it in the hole NOTHING Then i checked the plug nothing . I then took my Detector and swung it over the hole ,NOITHING then i swung it over the plug and nothing. It just VANISHED !!!!This had NEVER happened to me in this manner. I cut layers of the plug and still nothing. I have had badly rusted items before become broken up but never nothing this this . A COMPLETE VANISH. I then took a dime out of my pocket and and laid it on the ground. i got almost the same signal as i first got the first time scanning the ground. Before i tell you what happend have an y of you had anything like this happen to them ?

 

Amazon Forum Fav 👍

A Handbook of Civil War Bullets and Cartridges - Grab it through Amazon!

[ROBOTCOP13]

Were you wearing your silver spurs?

 

[pepperj]

I was at a park camp ground with my horses . We were camping and i decided to test out my Deus 2 with the 9 inch coil running version .071 . I was running the XY program. I got ther bar line in the proper areas. I looked in the top left and seen the 92 to 93 id numbers. I got down with my hand Digger and cut about a 8 inch plug about 6 inches deep. I then took my pinpointer and stuck it in the hole NOTHING Then i checked the plug nothing . I then took my Detector and swung it over the hole ,NOITHING then i swung it over the plug and nothing. It just VANISHED !!!!This had NEVER happened to me in this manner. I cut layers of the plug and still nothing. I have had badly rusted items before become broken up but never nothing this this . A COMPLETE VANISH. I then took a dime out of my pocket and and laid it on the ground. i got almost the same signal as i first got the first time scanning the ground. Before i tell you what happend have an y of you had anything like this happen to them ?

It could of been just out of reach of the PP, and you broke the halo. Have happened many times, dig a little deeper and bingo.

 

[Kray Gelder]

A mineralized layer will do that sometimes.

 

[Terry Soloman]

Tree root?

 

[GoDeep]

Coin stuck to the digger?

 

[JVA5th]

I've had this happen but resolved my issue in my case. A few times my shovel tip caught something like a pull tab and as u pulled the shovel out it drops and flings off away a bit. So perhaps something like that?

 

[Gare]

Ok after putting all my plug back in place i picked up my Lesche type digger (NOKTA) and stuck on the back side of the blade was a dime. It was a 1964 SILVER DIME . I was only out for maybe 15 or 20 minutes because it was to hot to do anything else. I got a Dime, Nickle and a Penny . I have NEVER had this happen to me !!1 GREAT JOB GODEEP !!!

 

[pepperj]

Tree root?

In 50-55 years never dug a tree root signal.
Tree root growing through a find yes many times.
But just bare roots that's a new one.

 

[GoDeep]

Ok after putting all my plug back in place i picked up my Lesche type digger (NOKTA) and stuck on the back side of the blade was a dime. It was a 1964 SILVER DIME . I was only out for maybe 15 or 20 minutes because it was to hot to do anything else. I got a Dime, Nickle and a Penny . I have NEVER had this happen to me !!1 GREAT JOB GODEEP !!!


View attachment 2033937View attachment 2033938View attachment 2033939

Thanks, it happened to me once!

 

[Tnmountains]

Was my suggestion as well as had a coin in clay stick to mine.. Rare and make you think you are nuts.

 

[Gare]

Was my suggestion as well as had a coin in clay stick to mine.. Rare and make you think you are nuts.

TnMountains you are SO CORRECT ~~~

 

[ROBOTCOP13]

I once painted an aluminum beach sand scoop with silicon embedded epoxy paint made for aluminum hulled boats like air boats. Makes them super slick like "duck poop on a wet dock".
It helped to shed the sand by taking the grabbiness out of the aluminum.

 

[crashbandicoot]

Tree root?

Wild Root!!

 

[crashbandicoot]

In 50-55 years never dug a tree root signal.
Tree root growing through a find yes many times.
But just bare roots that's a new one.

Only happens around the ironwood tree roots.

 

[Jorgeke]

I was at a park camp ground with my horses . We were camping and i decided to test out my Deus 2 with the 9 inch coil running version .071 . I was running the XY program. I got ther bar line in the proper areas. I looked in the top left and seen the 92 to 93 id numbers. I got down with my hand Digger and cut about a 8 inch plug about 6 inches deep. I then took my pinpointer and stuck it in the hole NOTHING Then i checked the plug nothing . I then took my Detector and swung it over the hole ,NOITHING then i swung it over the plug and nothing. It just VANISHED !!!!This had NEVER happened to me in this manner. I cut layers of the plug and still nothing. I have had badly rusted items before become broken up but never nothing this this . A COMPLETE VANISH. I then took a dime out of my pocket and and laid it on the ground. i got almost the same signal as i first got the first time scanning the ground. Before i tell you what happend have an y of you had anything like this happen to them ?

You have already mentionned what happened, however, I have a diferent experience, sometime a nail generate on the soil a layer of oxide, circle shape, when I dug that layer disapear and my metal detector discriminate the nails, so signal and ID disapear, PP could find it

 

[SD51]

Great story Gary and glad you found the target! Bonus it was silver!

 

[Gare]

It could of been just out of reach of the PP, and you broke the halo. Have happened many times, dig a little deeper and bingo.

You forgot to read where i TOOK THE Detector back over the spot and NO SIGNAL !

 

[smokeythecat]

To answer the initial question I have had it happen a few times. Once it was a pull tab I flung a foot or so away, once was (whatever it was) stuck to the digger, third time, an item on its side the pinpointer couldn't see. I dug a little more and there it was.

 

[Tjay014]

I was at a park camp ground with my horses . We were camping and i decided to test out my Deus 2 with the 9 inch coil running version .071 . I was running the XY program. I got ther bar line in the proper areas. I looked in the top left and seen the 92 to 93 id numbers. I got down with my hand Digger and cut about a 8 inch plug about 6 inches deep. I then took my pinpointer and stuck it in the hole NOTHING Then i checked the plug nothing . I then took my Detector and swung it over the hole ,NOITHING then i swung it over the plug and nothing. It just VANISHED !!!!This had NEVER happened to me in this manner. I cut layers of the plug and still nothing. I have had badly rusted items before become broken up but never nothing this this . A COMPLETE VANISH. I then took a dime out of my pocket and and laid it on the ground. i got almost the same signal as i first got the first time scanning the ground. Before i tell you what happend have an y of you had anything like this happen to them ?

Had similar experience years ago. The coin was stuck in the dirt on the shovel.