flourescent ballasts

THingfool

Full Member
Joined
Feb 7, 2009
Messages
206
Reaction score
3
Golden Thread
0
Location
NE Indiana
Detector(s) used
Tiger Shark,1280-x,Cortes, White's 6DB
Primary Interest:
Beach & Shallow Water Hunting
These ballasts are all newer. Our building was built in 2002 and they are slowly starting to need replaced. May end up with about 50 of them. They are all 4 bulb ballasts. Thank you.

Ed
 

I just cut the wires from the fixtures and throw the rest in the tin/iron scrap

Iron worth about .09 cents per pound

#1 wire about $1.00 per pound

#2 wire about .50 per pound

this way would be the fastest and most profitable
 

They are transformers, throw them in with the motor breakage/electric motors. Scrap steel pays 7 cents and motor breakage pays 20 cents per LB.
 

The newer ballast do not contain any PCB's and are easy to spot since they are marked so right on the metal casing. If you peel a ballast apart you will find a copper transformer encased in a resin. The resin is usually on the brittle side and can be beat off the transformer. On one end will be an aluminum foil capacitor(s). Some ballasts have a combination aluminum and copper transformer. Regards, Chris Hyder.
 

Thanks for all the replies. Will bring them home and do something with them, that's for sure.


Ed
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom