wildpig
Full Member
- Joined
- Jul 25, 2015
- Messages
- 143
- Reaction score
- 108
- Golden Thread
- 0
- Location
- Eastern Oklahoma
- Detector(s) used
- Garrett AT Max, AT Pro, Minelab Equinox 800, XP Deus 2
- Primary Interest:
- All Treasure Hunting
I found this in Virginia on a CW Battlefield. It had some 1700's houses on the property too. Its made of wrought iron, with a different (maybe higher carbon)adjustable insert.
Approx. 2.5" long and 1/2" wide. Looks like the remnants of a thumbscrew on one end of a C clamp, and the other part is mounted in a slot to allow for adjustment. Also looks like it might be able to swivel on the pin thru the rivet holding the two together. Thought it may have been a flintlock hammer when I dug it up, but electrolysis ruled that out.
Approx. 2.5" long and 1/2" wide. Looks like the remnants of a thumbscrew on one end of a C clamp, and the other part is mounted in a slot to allow for adjustment. Also looks like it might be able to swivel on the pin thru the rivet holding the two together. Thought it may have been a flintlock hammer when I dug it up, but electrolysis ruled that out.
