Looking for nickels with the impact. Any advice?

[Ammoman]

I took the day off yesterday and spent it with my son at an old local park. Obviously the park has been cherry picked with very few high tones to be found. that said, lots of mid tones left behind and most are foil targets with VDI's right inside the nickel range.

Is their any way to pick out the nickels from these targets? When i had the E-trac, the gap was very tight and when i saw a 12/12 or 12/13 i was 90 percent sure it was a nickel.
My son has an AT pro and can pick out a nickel with a very high probability as well.

any tips or techniques?

 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!

[dave_e]

Running in Di3 at 20kHz nickels are easier for me to hear and separate out from foil and can slaw by sound alone.

 

[Ammoman]

thanks...so maybe it will be more about sound and less about VDI numbers with the Impact? When it comes to quarters dimes and copper pennies, i have it down pat. its the nickels that elude me. so far the only nickels i have found were in the hole with other change and when i was digging every signal meaning massive amounts of trash. I know silver has a distinct higher pitch in Di99. maybe i will play with a few nickels in di99 as well.

 

[dave_e]

Definitely sound for me with mid tones. Those nickels sound nice and smooth. Foil and slaw have a scratchy, squawking element to the sound. Hard to explain, and it’s not 100% but I missed a few nickels with my Racer 2 that I’m finding easily with the Impact.


Sent from my iPhone using Tapatalk

 

[Icewing]

It just takes practice to listen to the sharpness of the tone, but not getting locked in on a specific TID, buffalo nickels, war nickels, and V nickels can sound slightly different from today's common Jeffery. Focus on translating sound into shape in your mind. But in all honest I say dig them all and you'll find more gold.