Maybe a Scarce CW Bullet I dug yesterday???-SOLVED by CB Guy..

VOL1266-X

Gold Member
Joined
Jan 10, 2007
Messages
5,589
Reaction score
2,910
Golden Thread
0
Location
Northern Middle Tennessee
Detector(s) used
Fisher 1266-X, F75 X 2
Primary Interest:
Relic Hunting
I dug the bullet in the pic yesterday at a CW camp. It measures within .002 inches to a M & M #483 which is a Wesoon .44 cal. long used in a Frank Wesson rimfire single shot rifle or military carbine. One local relic dealer looked at the pic and thinks it IS a M & M #483 and he has only had a dozen or more to sell since he's been in business. What do you CW bullet experts think? Thanks, Quindy.
 

Attachments

  • M & M #483 .44 Cal. Frank Wesson Long.webp
    M & M #483 .44 Cal. Frank Wesson Long.webp
    18.9 KB · Views: 1,240
Re: Maybe a Scarce CW Bullet I dug yesterday???

It could be either a .44 Wesson or a .44 Ballard. (By the way, the Thomas-&-Thomas bullet handbook says the Wesson was a .42-calber.) The main difference between those two bullets is that the Wesson has (indented) grooves and the Ballard has (raised) rings. Due to the dirt/crud still on that area of the bullet's body in your single photo, I can't tell for certain whether it has rings or grooves. Need more photos, with the bullet cleaned up a bit better.

Or, since you can eyeball the bullet in real-life, tell us whether you think you're seeing grooves or (slightly) raised rings. That will tell you whether your bullet is a Wesson or a Ballard.
 
Upvote 0
Re: Maybe a Scarce CW Bullet I dug yesterday???

TheCannonballGuy said:
It could be either a .44 Wesson or a .44 Ballard. (By the way, the Thomas-&-Thomas bullet handbook says the Wesson was a .42-calber.) The main difference between those two bullets is that the Wesson has (indented) grooves and the Ballard has (raised) rings. Due to the dirt/crud still on that area of the bullet's body in your single photo, I can't tell for certain whether it has rings or grooves. Need more photos, with the bullet cleaned up a bit better.

Or, since you can eyeball the bullet in real-life, tell us whether you think you're seeing grooves or (slightly) raised rings. That will tell you whether your bullet is a Wesson or a Ballard.
CBG, It has grooves although it looks like raised rings. When you run your figer over the rings, they are not raised and don't measure any larger than the diameter. I just wanted another opinion from an expert before I posted it on "Today's Finds" and I certainly consider you are a CW expert. It's a Wesson. Read the recovery story on TF forum. Thanks, Quindy.
 
Upvote 0

Users who are viewing this thread

Back
Top Bottom