Mercury Dime with head facing wrong way???

mastereagle22

Silver Member
Joined
May 15, 2007
Messages
4,909
Reaction score
31
Golden Thread
0
Location
Southeast Missouri
Detector(s) used
E-trac, Explorer II, Xterra30, Whites Prizm IV
Our weekly hunt happened last night and Baldingboy had secured a new place to hunt for both of us! I didn't understand why BB had to take flowers to the MALE home owner and I didn't ask.... ::) :wink: ;D (no flowers were injured during this detecting adventure)

So BB decided to take me to the place he had already hunted and found some great stuff and I was excited. There isn't one house on the WHOLE block I wouldn't love to detect.

Started out right off the bat digging several wheat pennies. Then some lead. One piece has what looks like to me, eyes that someone may have carved? I don't know looks like a platapus or maybe a crocodile?

Found some old iron square nails and lots of aluminum. Those aluminum gutter spikes were ringing in like Silver on the beast lastnight. Then I got into an area and pulled 4 Tilt tokens in the span of about 3 minutes! Tilt is a local arcade here at our mall.

I walked about 15 feet further and got a really strong Wheat Penny-high copper tone at about 10 inches. I dug down almost 11 inches and out popped what I thought was the bottom of a compact. Turns out that it was the top to a can of McGill fasteners and its from the 1800s!!!!!!!! I didn't know this until after I got home though.

So I filled the hole back in and walked about two feet to my left and got a dead on silver signal at 6 inches. I had just found the four tokens so I thought maybe I had another one. Made my plug and flipped it out and laying right in the side of the plug is a small glint of silver. The ground was moist and the coin had a good layer of mud on it but I could make out part of the face. I looked at it and thought I had a Mercury, which would be great since I haven't found one in a while when I noticed that this Merc's face was looking right and not left. It took my cold addled brain about 30 seconds to process that I wasn't looking at any Merc. I then thought it was Canadian until I flipped it over and the ONE DIME hit me in the head like a brick. I was totally dumbfounded. A BARBER DIME!!!!!!

BB wanted me to brush it off and see what the date was but I refused and resisted the urge and put it away in my special holder for good items. Later we washed it off and found out it was a 1910 and pretty worn on the bottom edge, but still my FIRST Barber and I was so pumped.

I detected for another two hours but it was all a blur to me. I found a little cheap cross, an angel charm and a Bell off a cat's collar.

Total for the night was 6 wheats, 17, 18, 19, 30, 46 and 54, The little cross and angel pin, the McGill top the little piece of lead which I think is funny even if it isn't anything at all and the Barber!!!!

I wanted to find one this year and I made that goal. The last goal I have to make this year and I don't think it will happen is an Indian Head penny. It is getting cold here quick and before long the ground will be frozen. I am planning on getting up early Thursday and hitting a spot for two hours but the wife says my plans don't match up with hers so I will have to play that one by ear.

Sorry about the fuzzy pictures but my little guy dropped the camera and now the macro is having trouble focusing, it may be time for Momma to get a new digital camera.... :-\

Thanks for reading.....
 

Attachments

  • stuff.webp
    stuff.webp
    78.4 KB · Views: 1,911
  • back.webp
    back.webp
    9.1 KB · Views: 1,900
  • barber.webp
    barber.webp
    28 KB · Views: 1,933
  • charms.webp
    charms.webp
    21 KB · Views: 1,902
  • eyes2.webp
    eyes2.webp
    11.7 KB · Views: 1,898
  • eyes.webp
    eyes.webp
    11.5 KB · Views: 1,884
  • keeps.webp
    keeps.webp
    34.4 KB · Views: 1,879
  • mcg.webp
    mcg.webp
    36.6 KB · Views: 1,899
  • mcgill.webp
    mcgill.webp
    51 KB · Views: 1,899
  • tilt1.webp
    tilt1.webp
    23.8 KB · Views: 1,903
  • tilt.webp
    tilt.webp
    17.8 KB · Views: 1,897
  • wheats.webp
    wheats.webp
    15.9 KB · Views: 1,913
Upvote 0
Great finds!!!!! :thumbsup:
 
GREAT ASSORTMENT OF FINES. :thumbsup:
 
Alright, Larry!! :headbang: What a rush, huh? :o

Congrats on your first Barber!!

HH,
CAPTN SE
Dan
 
I can't wait for that feeling ME.....Good Stuff!!! Congrat's on your first Barber :thumbsup:
 
Alright! Terrific! Congrats on a super hunt and that special dime.Proud of you,friend. :thumbsup: :thumbsup: :thumbsup:
 
I've found quite a few Mercs and those are cool but the Barber was a totally different experience!!!!!

I forgot to mention I found two and a half Matchbox type cars as well...... :-\
 
nice bit o goodies --the cross is a knock off of a german "iron cross" military award
 
Yeah, them "Mercs" can be quite tricky, especially in the early years eh? :wink: WTG!
 
WTG Larry. How is Baldingboy taking it? Is he crying like a baby? ;D ;D

:wav:
 
Congrats on your first Barber dime ME22 :thumbsup: I hope you find many more. :icon_sunny:
 
Holy smokes bud! You found all kinds of cool stuff and that Barber is beautiful! How exciting! Congrats on your first and hope you find many more!
 
Great Stuff!!! Looks like a good spot. Tony
 
Info on McGill Paper fasteners:

1860s ~ Brass Paper Fasteners: Metal paper fasteners similar to the brass ones in the photograph to the right were patented as early as 1866 by George W. McGill. "Brass paper fasteners, 25 cts. per box" are listed among the purchases for members of the 1869 Illinois Constitutional Convention. In 1867, McGill patented a press designed to punch holes in paper so that fasteners of this type could be inserted by hand. The larger device in the photograph is a McGill Fastener Press similar to the one patented in 1867. It was advertised as early as 1880. The smaller device is a McGill Fastener Punch patented in 1874. McGill exhibited paper fasteners at the 1876 International Exhibition in Philadelphia, but descriptions of the exhibit do not enable one to determine whether he exhibited only the small brass fasteners themselves or also fastener punches or presses. To see more paper fastener punches, click
 

Attachments

  • fastener_plate01.webp
    fastener_plate01.webp
    12 KB · Views: 1,630
Way to go, (me). Nice Barber. You had a great day and certainly found a nice place. Congratulations and
I'm happy for you. Great way to end the year. I wish you continued success. Doug (blklab) :thumbsup: :thumbsup:
 
A good barber is worth his weight in smooth shaving or maybe silver. Great find I am still looking for silver.
burdie
 
Larry, terrific hunt. . . that Barber is wonderful!!

Cool place to hunt!

All the best,
watercolor
 

Users who are viewing this thread

Back
Top Bottom