Need Help with White Coinmaster Classic I

[camb1]

I have a White Coinmaster Classic I that someone has stolen the coil. I would like to know what coils I can use and the wiring diagram from mainboard to the coil. This is due to someone also took the plug that goes to the coil. Any photos of this area of the mainboard and coils used would be great. Thanks In Advance.

 

Amazon Forum Fav 👍

Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!

[khouse]

If you call Whites they will sell you a connector and coil and tell you how to hook it up. I'll bet if you sent it to Whites they would only charge you for the coil and connector. Whites is tops on service!

 

[camb1]

Talked to White's and was told what coil to use. Also was told that they would email me the wiring diagram.

 

[camb1]

Have wiring diagram, now I need a 6b coil. 4" sniper or 8".

 

[khouse]

Did Whites not have a coil for you? Call all their service centers and ask for a coil.

 

[camb1]

I can find correct coil, but not the correct plug. This is a unit that the coil plugs directly to the mainboard with a 5 pin flat plug.

 

[khouse]

I can't believe that Whites didn't have the plug. Did you try the other Whites service centers? Post a picture if the coil terminal on the main board. I have a lot of books with plugs in them. Measurements wouldn't hurt either.

 

[camb1]

Have not called White's directly, just dealers in my area. Was hoping to find a coil with the correct plug on Ebay. This is a spare detector for a buddy, so I am not in much hurry.