Ok so I tried the "JE" mode on the F75 today...

Bart@Big Boys Hobbies

Supporting Vendor
🛒 Supporting Vendor
Joined
Jul 24, 2005
Messages
4,793
Reaction score
1,411
Golden Thread
0
Location
Moore Oklahoma
Detector(s) used
Call for your Treasurenet special discount! Be sure to mention Tnet when you call!
Primary Interest:
Metal Detecting
Ok so I tried the "JE" mode on the F75 today...

I am very confident with DE mode so I tried AGAIN to learn to use JE mode to gain that almighty extra depth. I was running DE, Sens 87, Discrim 10, 4h tones. I know JE is hotter so I cut the sens down to 50. To much more falsing at 50 so I ran it down to 40. Ran smoother but still allot of blips. Yes, I ground canceled several times too.

The good solid targets "coins" are harder to hear because they don't seem to be as solid/clear as signal in DE mode. I keep thinking I am missing good targets passing them over as bad because I'm not getting as good of an audio signal.

I got to the point I would find a good coin signal in DE then switch over to JE and lower the sensitivity way back down (sometimes in the 30's) and try to "listen" to it in JE. I know its deeper but how do you get confident in the poor signal quality? No matter how low of sens I used the DE mode still sounds better in the audio.

Is this normal?

I'm going out again Tomorrow so any and all pointers would be appreciated!!

BTW..... The new Sun-Ray probe is tits!!
 

Upvote 0

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom