Puck adapter 1/8 VS 1/4

[Dug]

I see WS4 puck adapters available but they take 1/8 jacks. Would a 1/4 to 1/8 adapter work to allow me to use my Gray ghosts or would it be a source to cause a break in signal?

 

Amazon Forum Fav 👍

A History of Mining on the Kenai Peninsula, Alaska - Grab it through Amazon!

[vferrari]

The adapter should work fine from an audio standpoint, though I might be concerned about the stress the adapter puts on the WS4 jack adapter. But they do make 1/4 inch WS4 puck adapters too. Just do a google search or ebay search on WS4 headphone adapters. Get the jack size that corresponds to the headphone you want to use most of the time (or get two WS4 puck adapters, one of each - at about $12 to $20 per adapter, they are not that expensive).

 

[Dug]

The adapter should work fine from an audio standpoint, though I might be concerned about the stress the adapter puts on the WS4 jack adapter. But they do make 1/4 inch WS4 puck adapters too. Just do a google search or ebay search on WS4 headphone adapters. Get the jack size that corresponds to the headphone you want to use most of the time (or get two WS4 puck adapters, one of each - at about $12 to $20 per adapter, they are not that expensive).

So far the only 6.3mm adapter size I can find online is from the Russian Federation on Ebay. I must be a dinosaur using headphones with a 1/4 jack lol.

Recommendation I got was to use a pig tail adapter to avoid any possible stress on the puck adapter.