ring with 14 and 3 lobed crown???

bravowhiskey

Bronze Member
Joined
May 29, 2009
Messages
1,452
Reaction score
952
Golden Thread
0
Location
Brazos Valley, Texas
Detector(s) used
Minelab Explorer SE
the 14 makes me want to sing out GOLD, then there is a 3 lobed crown symbol ??? but the greenish corrosion around the outside makes me say, "what the"??? There is no corrosion on the inside of this band, just a real nice gold color.
Maybe there was a non gold inset around the outside of this old ring? This puppy does have some weight to it, but I have no scale.
Found while looking at rock fill that was turned over at the end of a directional bore placing some telecommunications cable.
all the time I have spent MD'g and never found any gold, this was an eyeball find.
Anyone got any ideas?

Thanks and good luck.

DSC00926.webp DSC00931.webp
 
Have you looked at the rings surface with a 10X jewelers Loupe ? This should allow you to identify plating usually theres some holes and base material shows .
 
Upvote 0

Users who are viewing this thread

Back
Top Bottom