port ewen ace
Silver Member
- Joined
- Dec 16, 2012
- Messages
- 4,065
- Reaction score
- 7,787
- Golden Thread
- 0
- Location
- port ewen ny
- 🏆 Honorable Mentions:
- 2
- Detector(s) used
- AT-PRO & Equinox800
- Primary Interest:
- All Treasure Hunting
a GW with uneven planchet surface, resembles a die clash type surface on both sides or grease flow, likely from the blank having a flawed surface after rolling or impurities 
GW obverse die crack rim to bust thru "9"
'02-S SAC
'99-P SBA die crack rim to bust between star & "1"
GW reverse die cracks left & right sides of torch, found 3 of these to date
and 2 Madison & 1 Adams Proof VEWY PURDY ones
per Mike Diamond ---
the 3 raised vertical ridges spaced at 120 degree intervals on Proof dollars are not errors____ just the result of the 3 segment collar die used on Proofs to imprint the edge lettering.
as a special note ********
all proof dollar edge letters will ALWAYS be upright in relation to the obverse of coin. any lettering upright to the reverse of coin is an ERROR
I be dun now____________________________RELEASE THE HUNTERS & feed the hounds
GW obverse die crack rim to bust thru "9"
'02-S SAC
'99-P SBA die crack rim to bust between star & "1"
GW reverse die cracks left & right sides of torch, found 3 of these to date
and 2 Madison & 1 Adams Proof VEWY PURDY ones
per Mike Diamond ---
the 3 raised vertical ridges spaced at 120 degree intervals on Proof dollars are not errors____ just the result of the 3 segment collar die used on Proofs to imprint the edge lettering.
as a special note ********
all proof dollar edge letters will ALWAYS be upright in relation to the obverse of coin. any lettering upright to the reverse of coin is an ERROR
I be dun now____________________________RELEASE THE HUNTERS & feed the hounds
Upvote
0
