AstralDruid
Hero Member
- Joined
- Oct 22, 2019
- Messages
- 691
- Reaction score
- 1,324
- Golden Thread
- 0
- Detector(s) used
- Garrett
Minelab
Nokta
- Primary Interest:
- All Treasure Hunting
Tomorrow, i will spend the day at a pretty much unknown castle ruin in the forest, this place is remote and apart from the odd walker , it is rarely visited. Has been a ruin for 650 years, but was some great history before that.
So , it is in deciduous forest, oak and beech trees mostly, so there is plenty of Autumn foliage on the ground,, multiply that by 650 years and we have what i reckon is a near virgin site, but with anything of good target value under a lot of dirt....
So how to get the most depth out of the Nox 600??...
There could be great stuff here,, would searching at 10khz do the business ?
In Multi IQ, will the lower KHZ frequency bands still get their max depth ,
So basically what settings would you use if you were there ?
Basic questions, i know, but i really want to Max the Nox for this one and hopefully gain some trust in my new equipment..
Thanks in advance.
So , it is in deciduous forest, oak and beech trees mostly, so there is plenty of Autumn foliage on the ground,, multiply that by 650 years and we have what i reckon is a near virgin site, but with anything of good target value under a lot of dirt....
So how to get the most depth out of the Nox 600??...
There could be great stuff here,, would searching at 10khz do the business ?
In Multi IQ, will the lower KHZ frequency bands still get their max depth ,
So basically what settings would you use if you were there ?
Basic questions, i know, but i really want to Max the Nox for this one and hopefully gain some trust in my new equipment..
Thanks in advance.
Upvote
0