T2 finds silver

jimzz977

Bronze Member
Joined
Jun 23, 2012
Messages
1,791
Reaction score
4,707
Golden Thread
0
Location
New Mexico
Detector(s) used
Minelab Etrac
Primary Interest:
All Treasure Hunting

Attachments

  • image-3600793624.webp
    image-3600793624.webp
    78.3 KB · Views: 130
  • image-371017796.webp
    image-371017796.webp
    46.7 KB · Views: 125
Nice find. You can start putting your pulltabs on it and make a nice necklace.
 

Hey good idea,do you have one or sell the I make.
 

I see no medallions. Was the chain piled in clump? Chains aren't usually found and when they are, it is due to the medallions/charms that are on them. Nice find.
 

I see no medallions. Was the chain piled in clump? Chains aren't usually found and when they are, it is due to the medallions/charms that are on them. Nice find.

I was getting mixed readings of pulltabs and botttlecaps then got a reading of 85 I through it was a quarter so dug it up and found a pulltab and chech the hole still getting readings and found the broken chain I don't if my machine was reading the chain or just got lucky
 

I see no medallions. Was the chain piled in clump? Chains aren't usually found and when they are, it is due to the medallions/charms that are on them. Nice find.
The clasps that connect the chain will sometimes register on a detector if it doesn't have a medallion even when the chain is not in a clump. A T2 will find ridiculously small items with the stock coil and with the 5" coil even smaller stuff .Nice going Jim !
 

Thanks,getting to know my T2 I finding out that bottle cap come in at 85/89 same as a quarter . But went u raise the coil u start getting deferent readings and Its a bottle cap if readings don't change it is quarter. When I get a nickel reading its a pulltab or a nickel and when a get solid bottle cap reading its a zinc penny. So I had my T2 for 2months now can't see I find with it.
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top Bottom