vintage garrett master hunter ADS 111 battery cover knurled screws wanted

[m38_cdn]

Hi there, i am missing the knurled screws that hold my battery cover on my old garrett metal detector. I have contacted Garrett a couple times and they sent me wrong screws. Does anyone have a spare couple knurled screws that fit my battery cover for my detector.
cheers and thanks, john

 

[Jeff In North Georgia]

You may be able to get what you need at a lowe's or Home Depot in their special hardware area. They have the metal and plastic knurled nuts. Use a short piece of the screw super glued or with Loctite into the nut and you will be all set.

Jeff

 

[huntsman53]

You may be able to get what you need at a lowe's or Home Depot in their special hardware area. They have the metal and plastic knurled nuts. Use a short piece of the screw super glued or with Loctite into the nut and you will be all set.

Jeff

Good idea! Lowe's or Home Depot might even have Knurled bolts/screws that will fit. Just find a bolt/screw that will fit in the anchored nuts on the metal detector, then take it to Lowe's or Home depot to see if you can match it.


Frank