Water scoop recommendations for creek detecting?

[relicmeister]

I got my XP Orx ready for creek detecting with the water kit. I want to detect shallow creeks with small rock beds in areas of colonial history. Right now I only have the low Garrett beach scoop. I’m looking for a good quality scoop with a medium length handle or detachable or telescopic pole and a scoop that will hold up to small rocks.
Don’t want to spend too much on it as in under $100 for sure. Thanks for suggestions

 

Amazon Forum Fav 👍

Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!

[Irishgoldhound]

RTG scoops from Reilly’s

 

[Terry Soloman]

RTG scoops from Reilly’s

Ditto! Stainless Steel, NOT aluminum, as the rocks will tear up the aluminum scoop nose in no time.

 

[cudamark]

Depending on how big and tightly packed the rocks are, another option would be to use a turf digging shovel and pin pointer.

 

[OBN]

I got my XP Orx ready for creek detecting with the water kit. I want to detect shallow creeks with small rock beds in areas of colonial history. Right now I only have the low Garrett beach scoop. I’m looking for a good quality scoop with a medium length handle or detachable or telescopic pole and a scoop that will hold up to small rocks.
Don’t want to spend too much on it as in under $100 for sure. Thanks for suggestions

I might suggest a shovel first and see what your up against...like cudamark suggested

I've hunted up around the Delaware river and spots in the Northern part of the Chesapeake bay and if the rocks have any size to them it takes a shovel or a good quality scoop to get in there without breaking it. Pea gravel a regular scoop will work but those 4 to 8 inch stones get packed and its really tough getting into them.

 

[relicmeister]

A shovel does make more sense. I have a lightweight somewhat pointed and somewhat concave that would work. If I don’t see the target in it and the detector indicates it’s out I can put the shovel contents( after tossing larger stones) into a plastic strainer and use the pinpointer to get the target. I suppose I’d usually just spot it in the shovel though.
Really good suggestion that didn’t occur to me. Thank you. Now I need to make a floating plastic sifter I can tether on me.

 

[relicmeister]

Was thinking of using the 5.5 x 9 elliptical coil but could also use the 9” round. I haven’Thad a lot of luck in water but I want to keep at it till that changes. I know the goodies are in there.

 

[cudamark]

The 5.5 X 9 should have less water resistance and not lose much depth over the 9" round but with the same coverage. You're not going to use the Equinox?

 

[Tpmetal]

Depending on how big and tightly packed the rocks are, another option would be to use a turf digging shovel and pin pointer.

This.... no creek near me is gonna let a scoop in

 

[relicmeister]

The 5.5 X 9 should have less water resistance and not lose much depth over the 9" round but with the same coverage. You're not going to use the Equinox?

What I used when I had it but I decided to sell it. Needed funds to help family in need

 

[Irishgoldhound]

Was thinking of using the 5.5 x 9 elliptical coil but could also use the 9” round. I haven’Thad a lot of luck in water but I want to keep at it till that changes. I know the goodies are in there.

For not being a dedicated water detector, the Orx is pretty darn awesome in the water. Ive only had the Orx just over a month now. I have the 9” HF round and it glides quite nicely through the surf. My 3rd time water hunting with the Orx and I nailed a 14k 6 grammer with 6 small diamonds. I was pretty stoked how fast and hard it hit on it. I love the Orx.

 

[relicmeister]

For not being a dedicated water detector, the Orx is pretty darn awesome in the water. Ive only had the Orx just over a month now. I have the 9” HF round and it glides quite nicely through the surf. My 3rd time water hunting with the Orx and I nailed a 14k 6 grammer with 6 small diamonds. I was pretty stoked how fast and hard it hit on it. I love the Orx.

I’ve seen your posts and it’s clear you’re sold on the Orx as am I. If I were near the beach I would have probably not sold my. Equinox but I’m sure the Orx is fine in salt water and on wet sand. I look forward to doing a lot more water hunting.

 

[CASPER-2]

Ditto! Stainless Steel, NOT aluminum, as the rocks will tear up the aluminum scoop nose in no time.

get the RTG aluminum with the stainless lip - its what i use - and if you ever plan on taking on a plane
get the travel model - its what I use
https://www.flickr.com/photos/casper-2/6284356298/

 

[CASPER-2]

I might suggest a shovel first and see what your up against...like cudamark suggested

I've hunted up around the Delaware river and spots in the Northern part of the Chesapeake bay and if the rocks have any size to them it takes a shovel or a good quality scoop to get in there without breaking it. Pea gravel a regular scoop will work but those 4 to 8 inch stones get packed and its really tough getting into them.

mask and snorkel - wear dive gloves - even in the shallows - drop down and fan - its easy to move rocks

 

[nagant]

i have the rtg with stainless tip too. one piece handle, this thing is over built and tough!

 

[Xraywolf]

A shovel does make more sense. I have a lightweight somewhat pointed and somewhat concave that would work. If I don’t see the target in it and the detector indicates it’s out I can put the shovel contents( after tossing larger stones) into a plastic strainer and use the pinpointer to get the target. I suppose I’d usually just spot it in the shovel though.
Really good suggestion that didn’t occur to me. Thank you. Now I need to make a floating plastic sifter I can tether on me.

Pretty easy to make, this one I made from .25 dark plexiglas and PVC stuffed with and surrounded by pipe sleeves, use a surfboard tether strapped to my ankle, really handy [especially if you anticipate stones]