Which Pinpointer

[SandMan1130]

It’s between the Garrett Carrot and the Minelab profind 35?

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[3cylbill]

I like my carrot....

 

[Toecutter]

I have both but after using the Profind 35, I only use the 35 now, I thought the carrot was the best until I used the 35...

 

[RustyGold]

MI-6 or the wonderful Carrot!

 

[SandMan1130]

Thank you. I still can’t decide so many mixed thoughts

 

[Bodkin]

Carrot

 

[Professor of Engineering]

The Garrett Black or Orange model work very well.

 

[HighVDI]

Carrot is the best I've used so far but never used the minelab.

 

[BLK HOLE]

I like my carrot

 

[whistler84]

Just pull the trigger....please

 

[JasonJ]

What do you have now? If nothing for a pointer, then any is a good answer. I have the pro pointer II that comes in the box with the ACE400, as a beginner to the hobby, I haven't seen an obvious shortcoming yet... My previous being the Harbor Freight pos.

So I think either one would do. Both are high quality and effective units.

 

[Mphares]

I have both and would 100% recommend the Garrett Carrot. The Minelab PF35 has a bit thinner diameter so it fits in smaller spots, but it puts off false signals quite often and beeps for no reason. Its hard to tune out mineralization unlike the Garrett PP, which allows for a one touch balance. The one and only special benefit of the PF35 is that it has a special beep for iron, but most of the time you know if its iron before you dig. On the other hand it can help you if your signal is next to sa nail or something. The volume and vibration strength of the PF35 is also quite low, so pinpointing in a windy or noisy environment can be difficult. Overall, the novelty of the "iron audio" does not outweigh the performance, volume, and stability of the Garrett pinpointer.