CZ-21 Coil/Cable question

granthansen

Bronze Member
May 16, 2012
1,474
555
New Jersey
Detector(s) used
Minelab CTX 3030, Garrett Ace 350, Fisher CZ-21, Garrett Pro Pointer
Primary Interest:
All Treasure Hunting
Hey all... I got my Fisher CZ-21 from KellyCo and they did a fine job pre-assembling it. However, they didn't wind the coil cable around the shaft. Although the instruction manual says to finger tighten the cable to the coil, it's definitely on there a lot tighter than just done by hand. So, for you CZ-21 users... do you finger tighten? Or use a wrench and just gently tighten it off.

Hitting the beach Sunday. Can't wait!!
 

Upvote 0

lookindown

Gold Member
Mar 11, 2010
7,089
4,936
Florida
🏆 Honorable Mentions:
1
Detector(s) used
ACE 250,AT PRO, CZ21...RTG pro scoop...Stealth 720
Primary Interest:
All Treasure Hunting
How can the manual say that when everything is hardwired? You cant tighten any connections, the wire going into the coil, the coil wire into the housing, even the headphones are hardwired. Im confused.
 

OP
OP
granthansen

granthansen

Bronze Member
May 16, 2012
1,474
555
New Jersey
Detector(s) used
Minelab CTX 3030, Garrett Ace 350, Fisher CZ-21, Garrett Pro Pointer
Primary Interest:
All Treasure Hunting
Ah, lookindown, you are a genius! I was so focused on the cable that I misinterpreted the manual. Right now the cable isn't wrapped around the shaft, but I can simply release the coil portion from the upper shaft and wrap around, and then re-connect. Thanks. Sometimes simple things have to be pointed out!
 

lookindown

Gold Member
Mar 11, 2010
7,089
4,936
Florida
🏆 Honorable Mentions:
1
Detector(s) used
ACE 250,AT PRO, CZ21...RTG pro scoop...Stealth 720
Primary Interest:
All Treasure Hunting
Glad you got it figured out...good luck with your CZ.
 

CASPER-2

Gold Member
Jan 3, 2012
17,159
19,971
NEW ENGLAND
🥇 Banner finds
1
🏆 Honorable Mentions:
6
Detector(s) used
WHITE'S XLT, PI PRO, GARRETT 2500, 3- FISHER CZ21s, JW FISHER 8X
Primary Interest:
All Treasure Hunting
Good Luck with your CZ21
just dont wrap cord to tight
leave a little slack - if you make it to tight
you could put undue tention on the conection
and cause prob down the road
I let friend borrow one of mine and he wrapped it to tight
and from him putting pressure on the coil slowly pulled and pulled
and eventually I had to send in for repairs
 

OP
OP
granthansen

granthansen

Bronze Member
May 16, 2012
1,474
555
New Jersey
Detector(s) used
Minelab CTX 3030, Garrett Ace 350, Fisher CZ-21, Garrett Pro Pointer
Primary Interest:
All Treasure Hunting
Casper-2, thanks for the valuable tip!
 

Sandman

Gold Member
Aug 6, 2005
13,398
3,992
In Michigan now.
Detector(s) used
Excal 1000, Excal II, Sovereign GT, CZ-20, Tiger Shark, Tejon, GTI 1500, Surfmaster Pulse, CZ6a, DFX, AT PRO, Fisher 1235, Surf PI Pro, 1280-X, many more because I enjoy learning them. New Garrett Ca
Primary Interest:
All Treasure Hunting
I chest mount my control box and have the cable taped straight down the shaft with a small loop at the coil for strain relief. This is the best mount for non diving. The upper shaft is secured to my belt with a short bungee cord.
 

Last edited:
OP
OP
granthansen

granthansen

Bronze Member
May 16, 2012
1,474
555
New Jersey
Detector(s) used
Minelab CTX 3030, Garrett Ace 350, Fisher CZ-21, Garrett Pro Pointer
Primary Interest:
All Treasure Hunting
Sandman, what do you use for your chest mount?
 

Sandman

Gold Member
Aug 6, 2005
13,398
3,992
In Michigan now.
Detector(s) used
Excal 1000, Excal II, Sovereign GT, CZ-20, Tiger Shark, Tejon, GTI 1500, Surfmaster Pulse, CZ6a, DFX, AT PRO, Fisher 1235, Surf PI Pro, 1280-X, many more because I enjoy learning them. New Garrett Ca
Primary Interest:
All Treasure Hunting
granthansen said:
Sandman, what do you use for your chest mount?

Fisher still sells the chest mount belt though it isn't advertised on the web page. Just give them a call and they will ship one out to you. I forget the price but it is high quality stuff.
 

OP
OP
granthansen

granthansen

Bronze Member
May 16, 2012
1,474
555
New Jersey
Detector(s) used
Minelab CTX 3030, Garrett Ace 350, Fisher CZ-21, Garrett Pro Pointer
Primary Interest:
All Treasure Hunting
Thx. I will definitely do that. I need space for all my tools and pouches!
 

Top Member Reactions

Users who are viewing this thread

Top