Equinox vs Deus deep gold ring

tnsharpshooter

Hero Member
Jul 10, 2012
922
976
Tn
Detector(s) used
Xp Deus 2, Xp Deus 1, Minelab Etrac, Minelab Manticore
Primary Interest:
All Treasure Hunting
I got curious and borrowed this ring from my mother in law.
2j5dgkk.jpg


Says 10k on the inside, not too big a ring not real small either.
Ring IDs 9-10 air testing with Nox 800
So off to my clean area to bury.
Buried at7" deep.
No problem for Nox hitting with good ID in window.
Park 2 sens 23 speed 7 0 iron bias.

Well I buried on deeper a good solid 9" deep, could be as deep as 9.25" deep.
Same settings as above Nox hits the ring and IDs it. ID comes in window as 8/9and 10 on sweeps. Good tone even using speed 7, checked with speed 6 too good tone.

So I got curious and went and got the mighty Deus with 9" LF coil on.
I tried hot, deep, dues fast program--- no detection period Notta.
So I went back to house and broke out round HF coil 9".
I tried hot, deep, deus fast programs no detection period Notta.
Run high sens too, GB at ground reading using pumping.
Btw 6 ticks in Deus mineral strength meter so this ground not mild.
Didn't try 11" LF coil cause I didn't have it mounted to rod. I traded one of my 11" coils off a few days ago. Just so folks understand, Deus attempts were done using reactivity levels 1,2,2.5 and 3 keeping silencer at -1.

Thought I would share.
Might be some deep rings had with Nox, just saying.
 

Last edited:

WaterScoop

Bronze Member
Sep 12, 2017
2,181
3,710
SW Washington
Detector(s) used
Nox 800,
CTX 3030,
XP DEUS,
Excalibur II
Garrett AT Max,
Whites DFX,
Vanquish 540
Primary Interest:
All Treasure Hunting
Looks like the Equinox will Eclipse the Deus as well...

The boys in France will not be happy reading this post that’s for sure.

Thanx for the update

1806C6D3-19A2-4C36-8E3F-4BA7F4573367.jpeg
 

OP
OP
tnsharpshooter

tnsharpshooter

Hero Member
Jul 10, 2012
922
976
Tn
Detector(s) used
Xp Deus 2, Xp Deus 1, Minelab Etrac, Minelab Manticore
Primary Interest:
All Treasure Hunting
Wonder how many 9" deep gold rings been had using Etrac and CTX??
 

Oct 5, 2014
31,886
35,425
Massachusetts
🥇 Banner finds
1
🏆 Honorable Mentions:
1
Detector(s) used
Garrett: AT Pro, AT Gold & Infinium; Minelab: Explorer SE, II; Simplex; Tesoro: Tejon & Outlaw; White's: V3i
Primary Interest:
Relic Hunting
TN,

Thanks for sharing!

Doc
 

erte

Full Member
Mar 19, 2017
113
68
Croatia
Detector(s) used
gpx 4800, tdi pro, sov gt/xs, sand shark 10.5'', vaquero
Primary Interest:
All Treasure Hunting
can you do a test just with nox how deep will it go on that ring with lowest recovery speed? is 2 the lowest speed? will it hit at..13-15in with speed of 2?
does recovery speed of 1 exist on the machine?
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Top