1969 kennedy double headed half dollar??

DigginThePast

Gold Member
Dec 31, 2008
10,706
86
Primary Interest:
All Treasure Hunting
Yup, magician/trick coin. Still would like to see a pic of it. :icon_thumright:
 

Mackaydon

Gold Member
Oct 26, 2004
24,128
22,921
N. San Diego Pic of my 2 best 'finds'; son & g/son
🏆 Honorable Mentions:
2
Detector(s) used
Minelab Explorer
Primary Interest:
Shipwrecks
This is NOT something that was done at the Mint. It's a privately made novelty item, known as a Magician's Coin, created by altering two normal coins and joining the pieces back together. Use a magnifier to check just inside the rim on one side of the coin -- you are looking for the seam where the two pieces were joined -- it could be on either side of the coin.

They cost about $7-8 new from novelty shops and sell for $2-3 on eBay. They have no value to coin collectors, however, because they are privately made by damaging genuine coins.

The only possible good news is that if you have an older magician's half dollar made before 1965, it would have enough silver in it that you could probably sell it to a scrap dealer for around $6 or more.


The other thing you could do is hold onto it for magic tricks and making bets.... but be prepared to run fast if you use it for a bet.


Many years ago the Mint had all coin presses redesigned so that dies are "keyed". That is, obverse dies only fit into the obverse anvil and reverse dies fit into the reverse anvil. It's physically impossible for two same-side dies to be put into a press. While many errors including "mule" coins (half one denomination, half another) can still occur, double-headed coins are not and cannot number among those mistakes. (Source: another online)

Don...
 

Iron Patch

Gold Member
Sep 28, 2007
19,254
8,730
Dirtyville
🥇 Banner finds
3
Detector(s) used
Deus
Primary Interest:
All Treasure Hunting
Yep, had a William penny that had a bust on both sides (and the seam) Worth keeping, will win you lots of coin flips!
 

Top Member Reactions

Users who are viewing this thread

Top