rook74
Tenderfoot
- Dec 26, 2017
- 9
- 11
- Detector(s) used
- Nox 800, AT Pro, Tesoro conquistador
- Primary Interest:
- Other
Received my 6" coil about 2 weeks ago. Took it out used it and I like the coil so far in tight places and super heavy iron. I turned on the nox 800 today to try out the wm08 module with earplugs to check out the sound quality etc.
Error code "Cd" popped up and the nox shut down a couple seconds later. Coil not detected ugh. checked connections, factory reset performed with same end result. Changed back to the 11" coil all is well with it and the control box. Reconnected the 6" and back to "Cd". I'm guessing a loose wire or weak solder connection.
Checked the coil cover everything was intact and clean.
Calling the service center tomorrow to try to get it sorted, returned and exchanged etc. Are the odds high that I'll be required to send the whole unit back or just the 6" coil giving me fits? Hopefully just the coil..
Btw the wm08 wireless module seemed to work fine with a pair of cheap RCA brand ear buds (fair sound quality and no discernible latency or clipping)
thanks
Error code "Cd" popped up and the nox shut down a couple seconds later. Coil not detected ugh. checked connections, factory reset performed with same end result. Changed back to the 11" coil all is well with it and the control box. Reconnected the 6" and back to "Cd". I'm guessing a loose wire or weak solder connection.
Checked the coil cover everything was intact and clean.
Calling the service center tomorrow to try to get it sorted, returned and exchanged etc. Are the odds high that I'll be required to send the whole unit back or just the 6" coil giving me fits? Hopefully just the coil..
Btw the wm08 wireless module seemed to work fine with a pair of cheap RCA brand ear buds (fair sound quality and no discernible latency or clipping)
thanks
Amazon Forum Fav 👍
Last edited: