Advice appreciated

[mikesand]

So, I pulled the trigger and picked up the Teknetics Liberator last week, after a few members brought it to my attention and I did a bit of research on it myself. Anyone have experience with this unit? If so what settings worked best for you? Thanks, Mike

 

Amazon Forum Fav 👍

Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!

[Loco-Digger]

I owned the BH Land Ranger Pro. the Teknetics liberator is the same machine. Be sure you start with zero discrimination when you get to your site. Sweep the coil until you find a quiet patch and do a ground grab to set the Ground Balance. On the LRP I mainly used mode #4 , sensitivity 8 to 10 depending on the location and I had been discriminating out 1 through 29. I am a coin shooter and now that I have a few years under my belt detecting I use way less discrimination.

 

[Loco-Digger]

I recommend you go to the bounty hunter forum and look for post regarding the Land Ranger Pro or LRP. There are plenty of posts back in 2015 and 2016.

 

[mikesand]

Thanks for the input Loco!