AQUA PULSE ISSUE

G.I.B.

Gold Member
Feb 23, 2007
7,187
8,537
North Central Florida
🏆 Honorable Mentions:
1
Detector(s) used
CTX 3030 / GTI 2500 / Infinium LS / Tesoro Sand Shark / 1 Garrett Pro-pointer / 1 Carrot / Vibra Probe 580 (out on loan) / Lesche M85 / Mark1 MOD1 EyeBall
Primary Interest:
Other
Look up ScubaFinder and PM him.

He's the local expert and rep.
 

Octopulse

Full Member
Mar 13, 2010
148
82
Perth
Detector(s) used
Current detectors;
Minelab Excalibur II
Garrett XL500 “Super Pulse”
White’s MX7
White’s XL PRO
Primary Interest:
All Treasure Hunting
Just recently starged getting a random phantom hit using my AP on the beach...rarely get it wet and have not had this issue until last week.

It happens about once every minute...

Keep us updated if a cause is found.

1. Can you try a different coil.
2. Could be EMI if it's happening at a frequent / regular interval.
3. Check the coil with a multimeter and check the resistance. You can compare it against what Aquascan recommends or I can provide for you here. All coils and accessories have a resistance value so you can get a good idea if one is faulty.

Good luck....I love my AQ1B.
Tony.
 

Top Member Reactions

Users who are viewing this thread

Top