restless spirit
Full Member
hey highbankers. I have a highbanker on the way that runs on a tsunami t500 pump. any recommendations for a hose
bilge pump hose ?
- Thread starter restless spirit
- Start date
motohed
Hero Member
- Dec 27, 2015
- 670
- 499
- Detector(s) used
- XP DEUS , AND OLDER GARRETT'S
- Primary Interest:
- All Treasure Hunting
I would look for a clear vinal hose or something simular so you can see if it's getting pluged up . look for one that UV rated , so the sun does'nt degrade it quickly . JMHO
russau
Gold Member
Make sure your hose has a smooth inner OR the turbulence will reduce the amount of flow to your equipment and cause the pump to work harder and the battery to be used up sooner.
that one takes a 3/4 hose, what else is 3/4? garden hose...
I have gotten the cheep pump hose from Jerrys, home depot, and walmart
this works best as it doesn't collapse or get pinched.
Attwood 6' Bilge Hose with Clamp - Walmart.com
If you are going to use it in-stream I wrap mine in a one gallon paint strainer bag.
http://www.lowes.com/pd_126392-968-11581/12FF_0__?productId=1008385
I have gotten the cheep pump hose from Jerrys, home depot, and walmart
this works best as it doesn't collapse or get pinched.
Attwood 6' Bilge Hose with Clamp - Walmart.com
If you are going to use it in-stream I wrap mine in a one gallon paint strainer bag.
http://www.lowes.com/pd_126392-968-11581/12FF_0__?productId=1008385
Last edited:
OP
OP
restless spirit
Full Member
- Thread starter
- #5
thanks for that info winners 58 ...very cool
