signal_line
Silver Member
- Nov 14, 2011
- 3,601
- 1,836
- Detector(s) used
- XP Deus
- Primary Interest:
- All Treasure Hunting
Was working a new area and got quite a bit of interference (buried electrical lines). Tried most everything--Frequency, Freq shift, Ground Balance, Sensitivity, Reactivity, Silencer, finally turned the Tx gain down to "1" and got some relief. Still not as good as I wanted. Restarted the maching in the noisy area and it helped quite a bit. Of course any changes I had made were lost and it still was quite a bit better. Can't guarantee it will work in your area but it's easy enough to try and see if it helps.