Coil for Tesoro Compadre

GA_Boy

Bronze Member
Jul 30, 2006
1,433
1,579
Jefferson, Ga
Detector(s) used
BH LRP
1265X,
GoldBug II
Primary Interest:
All Treasure Hunting
I'm trying to decide on which coil to get with the Compadre since you can't interchange them.
5.75" is best for trashy areas and the 8"gives quicker/better coverage.
This may be the last detector I buy so suggestions will be appreciated as to which coil too get.
I will be hunting woods around CIV battle sights, old home places, fields and parks. Also Florida beaches.
I also have a Fisher 1265X that I will maybe sell but I will keep my GBII.
I will be looking for Relics, Jewelry, and coins.
Thanks
 

Upvote 0

Fletch88

Silver Member
Mar 7, 2013
4,841
2,367
Valdosta, GA
Detector(s) used
Garrett ATPro- 8.5x11, 5x8, CORS Fotune 5.5x9.5
Tesoro Silver microMax- 8 donut, 8x11 RSD, 3x18 Cleansweep
Minelab Excalibur ll- 10" Tornado
Minelab CTX 3030
Minelab Xterra 305
Primary Interest:
All Treasure Hunting
For the list of places you are planning on hunting you will need at minimum a detector with adjustable ground balance and and sensitivity. The Vaquero or Tejon may be a better choice except for wet salt hunting. There the Sand Shark (pulse induction) would be a better choice, but the Vaq will work fine in dry sand.
Then there is always the ATPro which is about the best bang for the buck to get a water resistant machine to do a variety of hunting like you mentioned.
 

Last edited:

luvsdux

Bronze Member
May 16, 2007
1,767
690
Lewiston, Idaho
Detector(s) used
Multiple Tesoros and Whites
Primary Interest:
Metal Detecting
I agree with Fletch88 on the ground balance issue. However, as to your original question, I'd go for the 8" coil if you stick with the Compadre.
luvsdux
 

Fletch88

Silver Member
Mar 7, 2013
4,841
2,367
Valdosta, GA
Detector(s) used
Garrett ATPro- 8.5x11, 5x8, CORS Fotune 5.5x9.5
Tesoro Silver microMax- 8 donut, 8x11 RSD, 3x18 Cleansweep
Minelab Excalibur ll- 10" Tornado
Minelab CTX 3030
Minelab Xterra 305
Primary Interest:
All Treasure Hunting
I think I would get the 8" of I was buying a Compadre. Or you could step up to the Silver microMax and change coil sizes.
 

Top Member Reactions

Users who are viewing this thread

Top