Goldwasher
Gold Member
- May 26, 2009
- 6,077
- 13,225
- 🥇 Banner finds
- 1
- Detector(s) used
- SDC2300, Gold Bug 2 Burlap, fish oil, .35 gallons of water per minute.
- Primary Interest:
- All Treasure Hunting
WATER BREATHING DRAGONZOOKA
You'll get instructions/technical description with your box. I tell people to set it up so the grizzly does its job. Meaning if your adding material and oversize gravel and cobble are clearing with the occasional help...then start feeding. I threw away my flowgaugeamometer a long time ago!
With a prospector set barely clearing the grizzly its still working. With Rajun Cajun its still working.So, if you have tunable flow go for as level as you can get still clearing the grizz. You'll figure out how to fine tune based on field variables after a few trips...first and foremost don't let recovery worries slow your digging fantasies
WATER BREATHING DRAGONZOOKA
I still have a couple of scratches on my SUV from my last visit to That canyon. I was able to get some out with 400 grit sand paper and clear coat spray
Sell the A52 and buy a medium sized drop riffle for low water. Or toss out the guts of the A52 and line it with ribbed rubber mat. Those ski jump riffles in the A52 make it harder to catch fine gold, it can be easier and need less water without them.
I have a51 i cut out riffles except first one and last one for support( i did that second time out after reading a older post you did on fine gold recovery ). I run expanded metal with hogmoss under. Only ran carpet first time while waiting for hogmoss.I still have a couple of scratches on my SUV from my last visit to That canyon. I was able to get some out with 400 grit sand paper and clear coat spray
Sell the A52 and buy a medium sized drop riffle for low water. Or toss out the guts of the A52 and line it with ribbed rubber mat. Those ski jump riffles in the A52 make it harder to catch fine gold, it can be easier and need less water without them.
I have a51 i cut out riffles except first one and last one for support( i did that second time out after reading a older post you did on fine gold recovery ). I run expanded metal with hogmoss under. Only ran carpet first time while waiting for hogmoss.
Post some pics after you run it through blue bowl.
By the way Blue Bowl owners, what's the best way to process your +30's? Right now I'm stuck panning it. Turns out I'm not that good at not throwing the flakes out.