Error cent?

[Will45]

I found this 2004 that seems to have rims that are too tall for the coin. The coin's design is very weak and the rim is uneven in some areas. I compared it the rim to a normal 2013 cent. Is this an error?

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[deershed]

Go to Lincoln Cent Resource and ask,those guys know their stuff.


Lincoln Cent Resource

 

[kawika18]

I think it may be a broadstrike error. I have a 1988 quarter just like it.

 

[omga747]

Perhaps a dryer coin?
​Dryer coin gallery - many pictured - some extreme - Coin Community Forum

 

[BARKER]

Hi Will45; You need to ---

Post better pictures. To hard to tell from the pics you Posted ok. Most likely a broad strike but I can't tell without beter pics ok. PEACE:RONB

 

[MUD(S.W.A.T)]

I don't think its an error... I think its been done outside the mint. I think someone hammered the edges like you would to make a coin ring. You can almost see the hammer marks in the last picture, I think.

Keep @ it and HH !!

 

[Will45]

I don't think its an error... I think its been done outside the mint. I think someone hammered the edges like you would to make a coin ring. You can almost see the hammer marks in the last picture, I think. Keep @ it and HH !!

The rims are still wider than a normal coin though.

 

[Will45]

Here are some more photos where I also compare it to a dryer coin.

 

[MUD(S.W.A.T)]

If I understand you correctly, the rim is wider because someone hammered on the ends, causing the coin to curl out on the edge.

Keep @ it and HH !!

 

[Will45]

If I understand you correctly, the rim is wider because someone hammered on the ends, causing the coin to curl out on the edge. Keep @ it and HH !!

It does not curl anywhere, the rim is taller than a normal coin.

 

[deershed]

This was a struck through die cap I found.Looks a lot like the one you've got.
The other side of my coin looked like a normal cent though.

 

[Back-of-the-boat]

Put the coin on top of a normal cent and see if it is smaller in circumference, if so it has been rolled under pressure or hammered to enlarge the rim, if it is the same size as a normal cent then you may have something else.To me in the pictures it looks a bit smaller.IMO

 

[huntsman53]

Put the coin on top of a normal cent and see if it is smaller in circumference, if so it has been rolled under pressure or hammered to enlarge the rim, if it is the same size as a normal cent then you may have something else.To me in the pictures it looks a bit smaller.IMO

I agree! We really need better and closeup pics of the coin and pics with it compared to a normal Lincoln Memorial Cent (i.e. beside and on top of). The possiblities are a man made Error to appear like a Brockage (Capped Die Strike) or it is a genuine Brockage.


Frank

 

[MUD(S.W.A.T)]

It does not curl anywhere, the rim is taller than a normal coin.

Sigh, when you hammer the edge/rim of the coin to make a ring.. It curls the coin edge/rim out causing it to be "taller" the more you hammer.... I presume the diameter is smaller than a normal cent too, another sign it was hammered... See picture....

 

[Will45]

Put the coin on top of a normal cent and see if it is smaller in circumference, if so it has been rolled under pressure or hammered to enlarge the rim, if it is the same size as a normal cent then you may have something else.To me in the pictures it looks a bit smaller.IMO

The diameter is the same size as a normal coin. I'll probably take it somewhere to get looked at this weekend or next.

 

[Joe777Cool]

This was a struck through die cap I found.Looks a lot like the one you've got.
The other side of my coin looked like a normal cent though.

That looks more like a magicians coin in my opinion.